Originally Posted by nikon_f2t
Please, My question: Is the picture/procedure showing the floor jack raising the side at the designated jack point, and then the floor jack positioned away from the designated jack point (because the floor jack is using this location; cannot now remove the floor jack AND swap in the jack stand). The picture shows the jack stand positioned between the front wheel and the floor jack point.
The floor jacks are holding up the car. The jack stands are positioned at the rocker panels as back up. The procedure for the wood blocks is extraneous in my mind. I am aware you are technically supposed to use the jack stands to support the weight of car. But you are under the car for about 30 seconds, and the jack stands are there as back up.