View Single Post
      04-14-2012, 11:53 AM   #20
gre8tw8LL
Private First Class
2
Rep
169
Posts

 
Drives: 2012 F10 535i
Join Date: Feb 2011
Location: NorCal

iTrader: (0)

Thanks guys for instructions. I finally installed mine and it took about 15mins for each side as i had to use a hair dryer to warm up the OEM reflector. For those of you that need pix, see attached.

Pix #1
As you see on the first pix, you want to unscrew the (2) screws along with the bottom one at the base of the inner fender well (not shown in pix).
Name:  pix 1.JPG
Views: 3742
Size:  39.8 KB

Pix #2
You'll need to pull out the plastic covering to get behind the reflector as your pushing the OEM reflector inward.
Name:  pix 2.JPG
Views: 3846
Size:  50.1 KB

Pix #3
Getting ready to install painted reflector.
Name:  pix 3.JPG
Views: 3707
Size:  43.7 KB

Hope this helps.