Originally Posted by bobblehead
Just based on those spec. - the front has no issue at all. The rear is going to be pretty close border line clearing without rubbing. If you intend to lower the suspension later, then for sure, it will rub against the fender.
How could then ACS sell there wheel kit:
FA: 9,0 x 20" offset 22 with 255/35 R 20
RA: 10,0 x 20" offset 33 with 285/30 R 20
seems like this is very close in the rear as the M5 wheel with ET34.
only 1mm different.