|
For anyone that is interested. I have done alot of trial and error when using the BlackVue DR650GW 2 channel dashcams with a Powermagic Pro on a BMW F10/11/06/14 (5/6 series). I have found this combination is the best when connected to the fusebox in the glovebox:
Battery cable (Yellow) - Connect to Fuse 3 (OBD)
ACC cable (Red) - Connect to Fuse 12 (Light Module)
Ground cable (Black) - Connect to the bolt on when you take the side panel off (Where the Airbag key switch is)
Set the Powermagic Pro with this config:
(From left to right)
Up, Down, Up, Up, Up, Up
This will allow the dashcam to work for 6 hours as I have found that it dies after around 7 hours when set to 12 hours
Recording will also continue when car is off with stop start.
Hope this will help someone.
|