Quote:
Originally Posted by mragarg
Quote:
Originally Posted by remmib
Quote:
Originally Posted by bimmer321
Thanks for the input. Would you know if it is better to run a 9" or 9.5" all around as I was interested in getting a squared setup for the ability to rotate. What would be good offsets and tire sizes to run on both of those wheel setups (squared).
Thanks again Rem!
|
With a square set-up most use 245 or 255 tires all around, so you don't really need a 9.5" wide wheel, and it'll be much harder to find a 9.5" wheels to fit the front. I'd get a 9" with 245 or 255 tires with a offset of ET30 +/- a few mm.
|
If I'm using a 245/40R19 to stretch on 9.5 wheels what offset would I need for the front and back. I keep calculating 19 x 9.5 ET20 for the front which will stick out 12.7 from the fender I believe. What about rear with the same tires?
|
You can use the same offset in the rear.