Quote:
Originally Posted by lsturbointeg
did mine a few years back but because i had a PU splitter to install with the 3d carbon spoiler i decided taking the front bumper off was ideal
[img] View post on imgur.com [/img]
here i have the bumper off
[img] View post on imgur.com [/img]
the 3d spoiler basically fits over the lower part of your front bumper like so
[img] View post on imgur.com [/img]
i couldn't find the pictures i posted from where i installed the double sided tape but you'll see that you'll place some 3m tape across the spoiler where it overlaps the OEM lip by the fog lamp cover and you'll lay several pieces across all the way back to the other fog lamp cover. also, i used self tappers across underneath the bottom for added security. it's not very hard to do
[img] View post on imgur.com [/img]
[img] View post on imgur.com [/img] |
Quote:
Originally Posted by Ickdeep
I know its not the exact same but this is what I did for my front lip. I used double sided tape and then used 4 self tapping screws to keep the bumper in place
Red: Screws
Blue: Tape
[img] View post on imgur.com [/img] |
Huge thanks to both of you guys. I'll go ahead and try it out this weekend and see where I get. I'm assuming the bottom grill has to be taken off so that it can be installed properly or is it not necessary