Quote:
Originally Posted by Flying_Squad
Hi all, would the 750i caliper mod, coupled with 374mm rotors, work with the following aftermarket/non OEM 20 inch wheel?
front 20 x 9 ET35
rear 20 x 10.5 ET35
It's a concave setup, so should I be concerned about clearance between the 750i caliper when using these wheels, with this brake upgrade?
|
The difference in overall caliper size between the stock F10 front calipers and the 750/760 calipers is minimal. As far as wheel diameter, there will be no issue at all (hell, you can see I stuffed X5M calipers and 395mm rotors with my 20s). Caliper clearance from the wheel spokes could be an issue, but if the wheels will work on a stock F10 brake setup, then I would be shocked if they didn't work with the 750/760 brakes as well. Again, the overall caliper dimensions are near identical as far as I'm aware.
Do you have these wheels on your car now? If so, check how much clearance there is between the spokes and caliper now.