|
They recommended it being OK to remove the plastic cover and leave it off. But your right where there is no support without it.... Because the mounting is too high and you can see it starting to bulge because of the wires. I installed the right angle adapters for the optical and rca jack. It helped with clearance and the bulge is not so noticible. It helped with realigning the carpeting properly. For me, I can live with it for now.
I was more focused on sound proofing the trunk.
I put some more deadener on the floor of the trunk in front of where the main wire harness from the battery drops into the frame of the car. Also around the 1/4 panels and some behind the gas cap door. I don't get the rattling anymore, so I am happy with the setup.
|