|
I got around to install the parts needed for this retrofit on my F11. The coding went well. I can see the steering electronics module, and I can activate the switch, but there is no heating. ISTA doesn't have any errors. I'm not sure if it has functions to activate heating from Ista since it has the old FRM module. I can see I have voltage on the A92*1B connector that plugs behind the clock spring on pings 9 and 11, with pin 9 being the + and having continuity. I haven't tested anything else since it was midnight by the time I got to this step.
Any pointers I can get of possible pitfalls???
The steering wheel is dead cold and the switch LED light stays on forever when activated.
|