Quote:
Originally Posted by Alan l.
Not sure. maybe give Eibach a call to find out. could be the coil size/diameter.
Honestly don't even bother unless your springs are already installed on the car. If the springs are off the car inserting a rubber hose found at any hardware store is a better solution. I found my Eibach solution half dangling off my spring after driving around a few weeks with them. I ended up needing to put two zip ties to lock them in place since the glue wasn't strong enough to keep them on.
Alan
|
i'm trying to insert rubber hose onto the spring, but it's driving me nuts, i've been fighting with them for 2 days with no success. 1/2" ID hoses are tight fit and I cant push them onto the second coil, 5/8" ID hoses are way too lose and it's making noise when I press it.
now i'm thinking about using some heat shrink tubing. but it's a bit pricy.
http://www.amazon.com/gp/product/B00...dsamtunrepu-20
we can do a group buy on this one, it's 48" long and it's enough for 3 sets of springs.