[Livefour2day]

PART 1, Parts Required.

Ok i have just completed the Ambient lights in my doors and arm rest storage, and the following is how i did it.
this is the original BMW Ambient lights using all BMW parts and not aftermarket LEDs etc, the reason i went the OEM way is ive been told that aftermarket LEDs have been know to cause problems with the car.

first of all here are the parts required to start this DIY. (Based on a 2011 F10)

Qty 1, Optical conductor, door, front top left - 63319186635
Qty 1, Optical conductor, door, front top right - 63319186636
Qty 1, Optical conductor, door, rear top left - 63319186637
Qty 1, Optical conductor, door, rear top right - 63319186638
Qty 1, Optical conductor, door front pocket, left - 63319186639
Qty 1, Optical conductor, door front pocket, right - 63319186640
Qty 1, Optical conductor, door rear pocket, left - 63319186641
Qty 1, Optical conductor, door rear pocket, right - 63319186642
Qty 8, LED Module - 63319242150
Qty 1, Holder, fibre-optic conductor, front left - 51417225881
Qty 1, Holder, fibre-optic conductor, front right - 51417225882
Qty 1, Holder, fibre-optic conductor, rear left - 51427226459
Qty 1, Holder, fibre-optic conductor, rear right - 51427226461
Qty 1, LED module, center armrest storage compartment - 63319208283
Qty 9, 3 pin plug 837707203 (16 wired pins will be required ask your dealer to match to these plugs)

DIY PART 2 next..........