View Single Post
      02-11-2014, 11:35 PM   #1
BigDeep1
First Lieutenant
33
Rep
375
Posts

Drives: 2011 535i Sport - P1, P2
Join Date: Sep 2012
Location: Irving, TX - Valley Ranch

iTrader: (0)

DIY: F10 rear trunk spoiler install - performance spoiler

This mod was pretty straight forward and easy. I got a bmw performance spoiler from Taiwan like the rest of the members here and on the Fest. I love the mod and have no regrets.

The spoiler arrived well packaged with a roll of two sided tape. I cut the tape into strips and attached it to the back of the spoiler. I than laid the spoiler on a used yoga mat and peeled off the backing. I used a 50/50 mix of windex and water to spray on the clean trunk deck. The spoiler slid very easily. I actually wiped off some of the liquid with a paper as I thought I would have to wait forever for it to dry. IT came out great. The spoiler had a slight spot of paint missing as you can see from the pic. Also, the right corner was sitting up a little; however, every almost every member I have read who did the install had the same thing. I initially put a piece of tape there as well, but it was visible. It is really not that visible and you will forget about it.

The link has the pics:

https://plus.google.com/photos/11077...LzrhvCVwrqnuwE








Last edited by BigDeep1; 02-11-2014 at 11:49 PM..
Appreciate 0