Quote:
Originally Posted by Dan1416
There is one screw. It's under the cover for the button. Just pull that cover off and you'll see the screw
|
OK. I hope I will not end with this console being ripped off together with the gear shift and all of the other stuff and me going to the hospital with a heart attack
edit:
Done!
Dan1416 - Thank you. This was exactly what I had to do to get this screw. I'm alright so is the console...
Look at the picture below: The cover pointed with the red arrow needs to be pulled up to reveal the screw. After the screw is removed you can pull up the rest.
There are T-20 screws at the back, holding each particular part of the console (eg. ashtray etc.) After removing all of the screws the trim is free.
Next you have to remove ashtray lid and the cup holder lid:
This is very easy. You just have to slide the cover towards you, just look at the arrows in the picture. The cover and the ashtray have some little hooks bent in the opposite directions (marked green in the picture).
I hope this is helpful.
(Sorry for the low quality photos)
Cheers guys.