Quote:
Originally Posted by cpr
Hello James,
Recently I’ve installed a 10,25” CIC display with a navigation module on a 2012 F10.
Do you have a step by step on how i can code the new unit?
Thanks in advance.
|
Hi, I don't have a step-by-step guide, but there is a PDF floating around with details. I think it's an F11 the author did, but it shows you all the steps. There are loads of articles on this forum that detail the steps.
I'll see if I can find it. If you search for 'F10 NBT retrofit' and look through some of the older threads, you should find enough info about it. It's not difficult doing the coding, but you should try and read/understand what you are doing so you don't damage anything on the car!
