Quote:
Originally Posted by M_Bimmer
See post #11. If your steering wheel electronics module only has the small white connector (labeled 'B'), which in your case will be connected to your vibration motor, you'll need to change out the steering wheel electronics that has both the small white connector and the large 4-pin connector (labeled 'C'), which will plug into the steering wheel heater element and thermistor.
On top of the electronics module, you'll need a steering wheel with the heating element and thermistor.
Along with the steering column heater switch....
Then VO code the SZL for heating steering.
|
Thanks much. I was thinking it wasn't as simple as adding the button and coding, as it appears the steering wheels are different (unlike the F30).
I'll need to pull it apart to confirm...?