Thanks guys for instructions. I finally installed mine and it took about 15mins for each side as i had to use a hair dryer to warm up the OEM reflector. For those of you that need pix, see attached.
Pix #1
As you see on the first pix, you want to unscrew the (2) screws along with the bottom one at the base of the inner fender well (not shown in pix).
Pix #2
You'll need to pull out the plastic covering to get behind the reflector as your pushing the OEM reflector inward.
Pix #3
Getting ready to install painted reflector.
Hope this helps.