Not sure exactly what' your stock config right now.
Assuming you currently have square setup which is:
F: 18 * 8 et 30
R: 18 * 8 et 30
Then those 359M wheel will give you the following:
F: -14mm clearance from strut / +12mm extension outward
R: -20mm clearance from strut / +30 mm extension outward
Opinion: Not recommended and should not be done
If you have staggered setup on your stock ride right now which is:
F: 18 * 8 et 30
R: 18 * 9 et 44
Then those 359M wheel will give you the following:
F: -14mm clearance from strut / +12mm extension outward
R: +6mm clearance from strut / +32 mm extension outward
Opinion: Same as above. Look for something else. The rear wheel has aggressive offset and designed for M3 car more so. It's either too close to the strut or way too far outward that is going to rub the fender.
|