hi there
i purchased Ampire subwoofers which i though it was plug and play but i ended up returning everything back without connecting it, as the ampire subwoofer have 2 connection only ( positive and negative) and the car have that connectot with 4 slots , can u please advise how u did it or where as i need the same solution as u did so i will not cut the car connector ( so from the 4 pins to positive and negative )
thanks
Quote:
Originally Posted by cjp2k
I have completed the install, and can confirm that the Subs ARE NOT plug and play.
I got some second hand subs from ebay.de and they came with the connector and partial wiring.
The connecter on the car is slightly different and wont plug in and as said before you need to bridge the smaller wires with the bigger wires, I got a loom made up from my local auto electrician to connect the ebay plug with my oem plug and not have to cut any wires
No coding is required just plug in and away you go.
TIP... if you change the subs, remove the under seat air pipe as it makes fitting the slightly bigger sub easier...
|