Quote:
Originally Posted by hky
M_Bimmer my JBE arrive, looking at the A34*1b, how do you connect the pin 3 and 30? I have not open up the glovebox. I'm assuming the wiring harness for A34*1b do not have wires for pin 3 and 30.
Do I just get some female crimp terminal and slot it into the empty pin 3 and 30 holes?
Thanks
|
You will need to get the correct size and type of terminals so that their tangs properly lock into the plastic connector assembly A43*1B, else you just run the risk of your wires falling out.
The JBE connector assembly where you need to plug into socket location 3 and 30 is shown below.....I believe the socket is P/N 61131393704, but please double check this by measuring the socket that is currently in this connector.