2010 2011 BMW 5 Series Forum F10 - View Single Post - Before/After H&R spring install on my 535i

Juiced46 · 01-20-2013, 02:49 PM

I installed my H&R springs on my 2013 535i Msport a week ago. Car looks much better but slightly disappointed with the drop. I did a before and after measurement. My after measurement I did 1 week after the spring install to allow them to settle. Front came down just about 1" and the rear came down 5/8". Much less of a drop then the advertised 1.4" F 1.3" R.

Measurements were taken from the ground to the bottom of the fender, using the center cap on the wheels to center it. Measurements were 27 5/8" on all 4 corners. After in the front is 26 7/8" and rear 27"

Here are the pics

BEFORE

AFTER

01-20-2013, 02:49 PM	#1
Juiced46 Major 74 Rep 1,035 Posts Drives: 03 Turbo Cobra, 2011 335xi Join Date: Jun 2010 Location: Wallingford CT iTrader: (3)	Before/After H&R spring install on my 535i I installed my H&R springs on my 2013 535i Msport a week ago. Car looks much better but slightly disappointed with the drop. I did a before and after measurement. My after measurement I did 1 week after the spring install to allow them to settle. Front came down just about 1" and the rear came down 5/8". Much less of a drop then the advertised 1.4" F 1.3" R. Measurements were taken from the ground to the bottom of the fender, using the center cap on the wheels to center it. Measurements were 27 5/8" on all 4 corners. After in the front is 26 7/8" and rear 27" Here are the pics BEFORE AFTER
	Appreciate 0 Tweet Quote