[ciscospirit]

how to connect the NiVi3 ECU together with the other parts.


a.) From the ECU A80*1B goes one cable with 2 leads to the CAN Terminator 5 at PIN 9 and Pin 25.
b.) From the ECU A80*2B goes one LVDS HSDL cable directly to the camera. originally you have to use 2 cables, 1 goes to the bumper and the other from the bumper to the cam. (for better maintenance).
c.) From the ECU A80*3B goes a split cable with one end to the headunit and the other end to the power distribution box in the rear of the car.

especially there is some "custom work" needed, as there is no original cable, so you have to buy the cables, pins and terminals on your own.