Quote:
Originally Posted by v3n0m
Quote:
Originally Posted by AMTF10
Quote:
Originally Posted by n3985
Quote:
Originally Posted by AMTF10
And was it fairly easy to install the new bulbs using the same tool? Or since I'm using a new H7 bulb that doesn't have screw holes do I not need to re screw the torx screws in?
Also, did you use a LED replacement?
|
No I switched her bulbs to 3000K halogen to match her fog lights.
The H7 bulbs do not have screw holes, the torx screws are meant to clamp down the bulb by its side.
|
Just ordered a 90 degree T25 from Amazon. Wish me luck lol
|
No need to remove any screws. You're probably grabbing the securing bracket. You just twist to remove.
|
What part did you grab? The black with the wiring? I'm twisting it with no luck what so ever. The photo you posted is exactly how mine looks with the two torx screws. One top one bottom