[tinghei]

Please refer to below

Originally Posted by shawnsheridan

For proper connection:

1) Make sure motor is running if car is not on a Charger. OK
2) Make sure EDIABAS.ini (for Tool32 or INPA) is set for Interface = ENET.Already set
3) Make sure Windows Firewall is disabledalready set
4) Make sure all Antivirus programs are disabled.already set
5) Make sure LAN Adapter is set for DHCP and not using a Static IP.I am using USB ENET cable, will that make a difference??
6) The Target Connection Window should not be blank (It should show multiple target connections for different chassis').