Quote:
Originally Posted by M_Bimmer
Almost done with the mod...biggest effort is trimming the bottom of the trim and not messing up the trim itself.
I'm using the 90 degree LED source from the door panel pocket, and ran the wires down to the footwell light wires. The footwell light modules has two lights sources and 4 wires, ambient red, and courtesy white LED light.
I used the long light guide from the top of the door panel, and uses a little heat to curve it to the dashboard curvature.
The LED light is being driven by the footwell module, so by tapping into the gray and gray w/ red dash wires, they work like "factory".
I will do the trim above the head light switch on the driver's side in a few weeks (need another LED connector)
I will post pictures this weekend. It looks awesome.....
Cheers
|
I purchased one of this sets and ended up not using it because the instructions were not clear, so is sitting collecting dust in my garage
, post pictures of your final results
https://www.aliexpress.com/item/4000010385914.html