|
Some additional notes on fitting. The socket hinge should be at the bottom. There are 5 screws covered by clip on covers that have to be removed to get the plastic trim off. Do not slacken trunk latch. Trunk floor comes out after lifting flap and unscrewing 10mm nut at either side. The side trim has plastic clips that are easily removed once centre pin pulled out main body of clip then moves easily. You also need to remove side D ring by removing thorax screw. As a follow up to Boulder Bills post the two side D rings and the two at rear edge of trunk are for cargo net or tied downs. The rear ones are the body colour or at least the base coat colour of the car. Blue on my 2011 DSB and now grey on my 2013 Space Grey
|