Quote:
Originally Posted by GMP - MATTHEW
Quote:
Originally Posted by EL MEJOR
hmmm so if the OEM 20" wheel style 312 for F10 are
-front: 8.5" et33
-rear: 9" et44
and the ones I want which are OEM for F01/F07 21" wheel style 312 are
-front: 8.5 et25
-rear: 10" et41
would i need spacers? or would I already be flushed or over exposed because of the difference in width/offset? thanx for your input.  |
Front Wheels - If you have 8mm or more of space in between the fender and your factory wheels and tires, then the front wheels from the F01 will work. If you have more than 8mm than you may want to purchase a spacer to make them sit more flush.
Rear Wheels - A 10" wheel can fit back there its just the offset will determine if the wheel sits too far inside, just right or outside the fender. My guess that they may sit too far inside and not clear the suspension or just doesnt sit flush with the fender enough to your liking but clears the suspension. |
Wow thank you so much for this input its exactly the help I needed! THANX A BUNCH!!!