Quote:
Originally Posted by VB5ER
Ordered off shadowlinetrim. com
1 roll 30' by 4". Used a yard stick to cut into 2" pieces for the bottom trim pieces and the top front door trims. To make the big curve on the upper back window trim with one piece use a 4" wide piece and start on the forward part of the trim with the top part of the vinyl, by the time you make the curve you will be at the "bottom" of the 4" wide vinyl piece. It gives you more material to make the turn and the curve less severe. Hope that makes sense to you. I was pretty close to the end of the roll by the time that I was finished so you may want to buy two. I didn't do the "pillars" since they were matte already but if you are going gloss I would do those as well.
|
I found a guy that will do the trim for $100. Just wondering if you think I should try it myself or pay to get it done. Besides the 30' x 4' roll, do I need anything else? I'd hate to buy the roll, screw up and end up paying to get it done in the end. Thx.