Quote:
Originally Posted by SLVSRFR
Putting this out there for anyone searching for this definite answer just as I was to no avail.
Coding out EDC on the BMW F10 is possible.
I have successfully installed Megan Coilovers and personally coded out EDC through ESYS.
My 550 is equipped with Adaptive Drive, Dynamic Drive, and Dynamic Damper Control(EDC)
I simply VO coded out 2VA, 229, and 223 of my FA
Calculated FA
Wrote the FA to the car
Coded the following ECU's:
DSC
HU_CIC
KOMBI
ICM
Errors are now gone, I lost the option of "Comfort" mode but Normal, Sport, and Sport+ are there and functional.
Thanks to @roskinc for letting me know that he coded EDC out of his vehicle as well.
|
So i did this as follows but the 2011 550i manual trans will not let me select sport or sport +. i have no errors on the dash. i managed to get sport mode to work but i would have a parking brake reduced code on. i recoded and that went away but back to not being able to select sport or sport +. Any idea as to why? thank you