Quote:
Originally Posted by hky
Hi M_Bimmer, can you give me some guidance on how to go about coding this with BimmerCode?
Thanks in advance.
|
Make sure you have your new Driver's side switch assembly that includes the rear sunshade switch installed and connected
- Start up BimmerCode
- Select "Junction Box Passenger JBBFE" mddule
- Select "Expert Mode"
- Select "DTC_Sunblind_enable"
- Select "Enable"
- Hit back until "Code" shows up in the lower right hand side
- Select "Code"
- After coding, and JBE has reset, test your sunblind button....
If this does NOT work, report back.
Note: You do NOT need to enable "DTC_Sunblind_Protect", but if you do, it shouldn't change anything....that I'm aware of.
Hope this helps.