Quote:
Originally Posted by idog
Yeah, I'm measuring right now, but your F10 readings weren't the same as the F10 paddles I have here, the ones I have here are paddles from an F10 535i.
The -paddle
Off : 5.3kohm
On : 1.283kohm
The +paddle did match : 5.3kohm off and 2.297kohm on.
Anyway, I read your message wrong the first time. You said you were going to source SMD resistors in the right values. I read that as - get the same resistors that are now on the F10 paddles. Of course, you meant getting resistors to achieve the same off/on values as the F10 paddles are measuring.  My bad. Now ordered again. It's a good thing these smd's are cheap 
Edit : I stand corrected. Your measurements were on point. I'm an ass and measured the testpoints instead of the cable. Hence my bad reading for the - paddle. They work ! So thank you ! |
Could you please explain how you used the probes to measure the resistance. I read that it is actually not a good idea to measure on a live board.