View Single Post
      08-11-2015, 11:42 PM   #3
Jonny550
Brigadier General
Jonny550's Avatar
241
Rep
4,936
Posts

Drives: 2012 550i Xdrive
Join Date: Feb 2009
Location: Jersey Shore

iTrader: (14)

Quote:
Originally Posted by badblack550xi View Post
it takes patience bro used to take me one hour to pull that damn clip out, after a while i have a hand on it. there is a release at the back also try to stick a small screw driver there its like a button and push it to the side.
Well i finally got it out and hooked everything up . I double and triple checked every single loom and seated the connectors on the ECU . Low and behold the car does not start and i get a drivetrain malfunction and 4x4 malfunction .

Removed everything and installed the OEM wires and she fired up but there is a CEL . I looked over the wire looms and the Black wire on the juice box is screwed up . I should have brought it to your attention while i was there .
Appreciate 0