[Rich@GTBPerformance]

sales@gtbperformance.com | www.gtbperformance.com | 973 429 2839 | Facebook



Take your BMW's Styling to the Next Level with MORR's lightweight VS8.2 Wheels

Configure and price your VS8.2's @ GTBPerformance.com



The new MonoForged VS8.2 is lighter, wider, and stronger than any of its predecessors. The new VS8.2 weighs approximately 8.87-kg (19.52-lbs) making it about 1.03-kg (2.26-lbs) lighter than the MonoForged VS8. This weight reduction was achieved by implementing several advanced manufacturing processes. These include flow-forming, which reduces barrel thickness by up to ten-percent; Vehicle Specific Profiles (VSP); and Finite Element Analysis (FEA) for Vehicle Specific Load Ratings (VSLR), and Vehicle Specific Weight Optimization (VSWO).

The geometry of the revamped VS8.2's is also responsible for significant weight reduction. Hyperanalysis of the VS8.2's geometry enabled our engineers to improve the aesthetics of the design, while shaving an additional 0.8 lbs from the first VS8.2 prototype.

MORR Competition Wheels was established in 2005 and has since managed to position itself as an industry leader and innovator in Craftsmanship, Performance, Aesthetics and distinctive innovations. MORR Competition Wheels designs and engineers its own line of ultra-light weight performance wheels for high-end automobiles. Our main product lines, MonoForged™ and SpunForged™ are not only designed to improve your vehicle's performance but to equally enhance your vehicle's appearance.

Since its introduction in the market MORR has developed wheels that are tailor-made for every application and designed one-hundred-percent based on direct customer feedback. Every wheel is handcrafted exclusively to each vehicle allowing us to engineer a wheel based on specific diameters, width, offset, back pad thickness, brake clearance, and most important load rating. This company culture helps us to provide key breakthroughs in design and engineering that result in unique ultra-light performance wheels that have since their inception become industry icons.

Configure and price your VS8.2's @ GTBPerformance.com

We are Authorized for Export : Contact us about international shipping!

Technical Stuff:

You can reach us directly by calling 973 429 2839 to place your order over the phone.

Payment:
Credit/Debit Cards: Visa, Mastercard, Discover, PayPal

Other Payments:
Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.

Financing:
We offer up to 6 months interest free financing through PayPal's pay later. Pay no interest if paid in full within 6 months! Subject to credit approval

Tax:
All NJ customers will be charged 7% NJ Sales Tax

Shipping:
Shipping via Either UPS Ground or FedEx home delivery - Alaska and Hawaii as well as International options available

Hours of Operations:
Monday - Friday from 9AM - 7PM EST
Saturday/Sunday - Closed

Installs:
Need it installed? We have partnerships with local installers all over the USA with DEEP BMW experience and excellent reputations. Contact us today about a recommended installer in your area!

[Alan l.]

Shoot me a quote for a set of VS8.2 for a 535xi shipped to NY. (brushed cleared)

thanks,
Alan

[Rich@GTBPerformance]

Hand Brushed w/ Gloss Clear Coat Option






Hand Brushed w/ Tinted Clear Coat Option







Hand Brushed w/ Tinted Matte Clear Coat Option







Gloss Silver Powdercoat






Satin Gunmetal Powdercoat






Gloss Gunmetal Powdercoat






Satin Black Powdercoat






Gloss Black Powdercoat

[happymeal]

Should me a quote for a set of 20" for my f10 550i. Shipped to California...

[Rich@GTBPerformance]

Originally Posted by hchohan

Should me a quote for a set of 20" for my f10 550i. Shipped to California...

PM Incoming

[BMV8]

Originally Posted by hchohan

Should me a quote for a set of 20" for my f10 550i. Shipped to California...

same here shipped to 90015

[Rich@GTBPerformance]

Originally Posted by BMV8

same here shipped to 90015

PM sent! Thanks for your interest

[tinybeammer]

Hi can pm me the price as shown on the z4 with the same finish. mine is a f10, I want the 20" and what's the lead time to Singapore. Thanks.

[Rich@GTBPerformance]

Originally Posted by tinybeammer

Hi can pm me the price as shown on the z4 with the same finish. mine is a f10, I want the 20" and what's the lead time to Singapore. Thanks.

PM incoming

[cmhsam]

Originally Posted by Rich@GTBPerformance

Hand Brushed and Cleared - from Bimmerpost member dubsesd in Canada!





Hand Brushed with Tinted Clear Coat - Courtesy of a MORR Customer.








Incoming

Can you send me a quote for the same wheels on this black 3 series for my 2012 f10 535xi shipped to 43021 in a 20"? Also MORR VS8.2 Frozen Grey in a 20"

thanks

[Rich@GTBPerformance]

Originally Posted by cmhsam

Can you send me a quote for the same wheels on this black 3 series for my 2012 f10 535xi shipped to 43021 in a 20"? Also MORR VS8.2 Frozen Grey in a 20"

thanks

Sure thing!

[crl8474]

PM me price of a set of 20" brushed and cleared for an f10 535i shipped to 75078. Also, how long is the wait? I am reaching the point of REALLY needing to switch wheels.

Thanks.

[Rich@GTBPerformance]

Originally Posted by crl8474

PM me price of a set of 20" brushed and cleared for an f10 535i shipped to 75078. Also, how long is the wait? I am reaching the point of REALLY needing to switch wheels.

Thanks.

PM sent!

[shinsengjun]

Shoot me a quote for 20 inch set matte black

[Rich@GTBPerformance]

Originally Posted by shinsengjun

Shoot me a quote for 20 inch set matte black

PM sent!

[eXhilarat3d]

Please send quote for 20" and 21" for RWD, brushed and clear to 89135. How long are the lead times?

Thank you

[Rich@GTBPerformance]

Originally Posted by eXhilarat3d

Please send quote for 20" and 21" for RWD, brushed and clear to 89135. How long are the lead times?

Thank you

PM Sent! Thanks!

[Andy H.]

Hi Rich,

I'm loving the Eisenmann quad exhaust with the black tips.

In the meantime, would you please send me a quote for a set of 20" VS8.2 (brushed finish w/ clear coat) for a 2012 535i shipped to TX - 78248?

Also, can I re-use the TPMS sensors from the stock rims on these?

Thanks,

Andy

[Rich@GTBPerformance]

Originally Posted by Bulldog CFP

Hi Rich,

I'm loving the Eisenmann quad exhaust with the black tips.

In the meantime, would you please send me a quote for a set of 20" VS8.2 (brushed finish w/ clear coat) for a 2012 535i shipped to TX - 78248?

Also, can I re-use the TPMS sensors from the stock rims on these?

Thanks,

Andy

Glad you are loving that Exhaust! You'll have to send me over some pictures so I can see how it looks installed!

TPMS sensors will work perfectly on these wheels. I'll get you a quote via PM!

-Rich

[shinsengjun]

could you give me a quote for

20x9 front

20x10.5

standard finish with hankook v12

and without please asap

[Rich@GTBPerformance]

Originally Posted by shinsengjun

could you give me a quote for

20x9 front

20x10.5

standard finish with hankook v12

and without please asap

PM sent sir!