|
|
04-04-2012, 10:18 AM | #1 |
Commander
14
Rep 210
Posts |
Offsets tolerance
I need your opinions on replacing my OEM 18" wheels (8" ET 30 front and rear) with replica 19" ones with different offsets. According the ET calculator at tirerack it seems that they should fit if compared to the OEM 19" wheels (front 8.5" ET 33 - rear 9" ET 44).
What do you think? OEM Front From 8” 245/45 R18 ET30 to 8.5” 245/40 R19 ET33 9mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 3mm Rear from 8” 245/45 R18 ET 30 to 9” 275/35 R19 ET44 27mm LESS clearance on the strut side, and the outside edge of the wheel will RETRACT 1mm Agropoli wsp Italy m6 design Front from 8” 245/45 R18 ET30 to 8.5” 245/40 R19 ET34 10mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 2mm Rear from 8” 245/45 R18 ET 30 to 9.5” 275/35 R19 ET34 23mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 15mm
__________________
Stay Ahead!
E46(00-03) - E46 Touring (03-06) - E90(06-10) |
04-05-2012, 05:39 AM | #2 |
General
1571
Rep 29,203
Posts |
Front is only 1mm more tucked than OEM 19". Rear is more aggressive, but I doubt it'll rub.
__________________
F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3DDesign Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals | |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|