» MORR Wheels | Introducing the All-New 20" MonoForged VS8.2

MORRWheels · 10-26-2011, 05:40 PM

MonoForged™ VS8.2. - Lighter.Wider.Stronger.

After a great market response with the re-introduction of the MORR MonoForged™ collection, we were repeatedly asked to introduce a 20" version. Today, we are proud to introduce the newest addition to the MORR line-up: the 20" MORR MonoForged™ VS8.2

Like all wheels from the MonoForged™ collection, the 20" VS8.2 was re-engineered using extensive Finite Element Analysis (FEA), Vehicle Specific Weight Optimization, Vehicle Specific Load Ratings, Vehicle Specific Profiles, and MPC (MonoForged™ Proprietary Concavity).

Lighter. The new MonoForged™ VS8.2 is lighter, wider, and stronger than most 20" monoblock wheels currently available in the market. The all-new Front 20x9" VS8.2 weighs 10.34-kg (22.80-lbs) making it less than a pound more than the 19x9" VS8.2. The rear 20x10" VS8.2 weighs in at only 23.4lbs, and the 20x10.5" version is an astonishing 24.4lbs.

This weight reduction was achieved by implementing flow-forming, which reduces barrel thickness by up to ten-percent, Vehicle Specific Profiles (VSP) and Finite Element Analysis (FEA) by using Vehicle Specific Load Ratings (VSLR) and Vehicle Specific Weight Optimization (VSWO).

To ensure our wheels are ultra-lightweight and equally as strong, our MonoForged™ collection is manufactured using only the highest grade 6061-T6 Aluminum. All of our wheels conform to the strict international standards of wheel quality and manufacturing, which include VIA/JWL, TuV-Rheinland, and the SAE J2530 standards. In fact, every set of wheels ships with a copy of our SAE J2530 certification results.

The 20" MonoForged™ VS8.2 is rated at the new safety standard of 690-kg (1520-lbs) per corner; an increase of 30-kg over the previous standard, making the wheel significantly more resistant to load. Our VS8.2 are also subject to extensive Rotary Bending Fatigue, 13-degree Impact @ 0-degrees, 13-degree impact @ spoke, Radial Load Endurance and Radial Load Fatigue physical testing.

Available Sizes & Weights:

20x9" - 22.8lbs
20x10" - 23.4lbs
20x10.5" - 24.4lbs

Available Finishes:

Black: Gloss, Satin & Texture
Gunmetal: Gloss, Satin & Texture
Silver: Gloss, Satin & Texture
Brushed: Cleared or Tinted Clear

We will be posting more information on this thread regarding the 20" VS8.2 as it comes.

- The Team @ MORR

MORRWheels · 10-26-2011, 05:40 PM

More pics from this shoot here: http://www.m3post.com/forums/showthread.php?t=452250

- The Team @ MORR

Woobros2win · 11-18-2011, 03:41 AM

Could you post more wheel color. I'm interest on these wheels and can't decide which color i should get. Seems like there are many different color rims. Thanks

Rotor head · 11-23-2011, 11:38 AM

Very nice ...

Please pm quote.. And would like to run 245/20 and 275/20 tires, what kind of offset do you suggest for the 535?

bm5bullit · 12-05-2011, 09:55 AM

Ordered two sets of these wheels! My wife and I both have F10's (mine is carbon black and hers is AW) and this wheel finish and style look to be exactly what we both like. I have never seen a set up close but the resolution of the pics pretty much sealed it for me. Hoping to get these soon.

KRUZN335 · 12-06-2011, 02:25 PM

Quote:

Originally Posted by bm5bullit

Ordered two sets of these wheels! My wife and I both have F10's (mine is carbon black and hers is AW) and this wheel finish and style look to be exactly what we both like. I have never seen a set up close but the resolution of the pics pretty much sealed it for me. Hoping to get these soon.

definately a good choice of wheels!! these wheels look so sick on a F10

bm5bullit · 12-07-2011, 12:43 AM

Can't wait to get these on my car. I had a set of 20" BBS CH-R wheels on my M5 but I can tell from the pics that these wheels will be superior to them.

XDEEDUBBX · 12-07-2011, 12:54 AM

sexy..

wheeladdicts · 12-22-2011, 05:42 PM

Holiday special until DEC. 31...PM us with any questions

Suthrn · 12-22-2011, 05:59 PM

Can I get a price for a set of VS8.2 in a 19" setup for my F10? Thanks.

wheeladdicts · 12-22-2011, 06:01 PM

http://f10.5post.com/forums/showthread.php?t=599968

Hunter5179 · 12-23-2011, 02:16 PM

I PM you for pricing

wheeladdicts · 01-05-2012, 08:00 PM

Quote:

Originally Posted by Hunter5179

I PM you for pricing

Thank you!

Carlos@MORR · 04-11-2012, 12:20 PM

Haven't updated this in a while. Here are a few pics of our MonoForged VS8.2 | Matte Tinted Brushed:

Carlos@MORR · 04-11-2012, 12:21 PM

Some weight on the 20" VS8.2 wrapped on 255/30/20 Hankooks.

Before: 19" OEM 359

After: 20" MORR VS8.2

This is our 19" Setup for reference:

Alan l. · 04-11-2012, 01:02 PM

I wonder how brushed would look with regular matte clear

MORRWheels · 05-07-2012, 03:53 PM

Bump! We just might have to try that ^^!

10-26-2011, 05:40 PM	#1
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,547 iTrader: (1)	» MORR Wheels \| Introducing the All-New 20" MonoForged VS8.2 *MonoForged™ VS8.2.* - Lighter.Wider.Stronger. After a great market response with the re-introduction of the MORR MonoForged™ collection, we were repeatedly asked to introduce a 20" version. Today, we are proud to introduce the newest addition to the MORR line-up: the 20" MORR MonoForged™ VS8.2 Like all wheels from the MonoForged™ collection, the 20" VS8.2 was re-engineered using extensive Finite Element Analysis (FEA), Vehicle Specific Weight Optimization, Vehicle Specific Load Ratings, Vehicle Specific Profiles, and MPC (MonoForged™ Proprietary Concavity). Lighter. The new MonoForged™ VS8.2 is lighter, wider, and stronger than most 20" monoblock wheels currently available in the market. The all-new Front 20x9" VS8.2 weighs 10.34-kg (22.80-lbs) making it less than a pound more than the 19x9" VS8.2. The rear 20x10" VS8.2 weighs in at only 23.4lbs, and the 20x10.5" version is an astonishing 24.4lbs. This weight reduction was achieved by implementing flow-forming, which reduces barrel thickness by up to ten-percent, Vehicle Specific Profiles (VSP) and Finite Element Analysis (FEA) by using Vehicle Specific Load Ratings (VSLR) and Vehicle Specific Weight Optimization (VSWO). To ensure our wheels are ultra-lightweight and equally as strong, our MonoForged™ collection is manufactured using only the highest grade 6061-T6 Aluminum. All of our wheels conform to the strict international standards of wheel quality and manufacturing, which include VIA/JWL, TuV-Rheinland, and the SAE J2530 standards. In fact, every set of wheels ships with a copy of our SAE J2530 certification results. The 20" MonoForged™ VS8.2 is rated at the new safety standard of 690-kg (1520-lbs) per corner; an increase of 30-kg over the previous standard, making the wheel significantly more resistant to load. Our VS8.2 are also subject to extensive Rotary Bending Fatigue, 13-degree Impact @ 0-degrees, 13-degree impact @ spoke, Radial Load Endurance and Radial Load Fatigue physical testing. Available Sizes & Weights: 20x9" - 22.8lbs 20x10" - 23.4lbs 20x10.5" - 24.4lbs Available Finishes: Black: Gloss, Satin & Texture Gunmetal: Gloss, Satin & Texture Silver: Gloss, Satin & Texture Brushed: Cleared or Tinted Clear We will be posting more information on this thread regarding the 20" VS8.2 as it comes. - The Team @ MORR __________________ Web: MORRWheels.com \| Email: Sales@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET
	Tweet

10-26-2011, 05:40 PM	#2
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,547 iTrader: (1)	More pics from this shoot here: http://www.m3post.com/forums/showthread.php?t=452250 - The Team @ MORR __________________ Web: MORRWheels.com \| Email: Sales@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET

12-05-2011, 09:55 AM	#5
bm5bullit First Lieutenant Drives: 2013 BMW M5 Join Date: Jun 2009 Location: Texas Posts: 332 iTrader: (0)	Xmas gifts Ordered two sets of these wheels! My wife and I both have F10's (mine is carbon black and hers is AW) and this wheel finish and style look to be exactly what we both like. I have never seen a set up close but the resolution of the pics pretty much sealed it for me. Hoping to get these soon. __________________ 2012 Grand Cherokee SRT8 - her car 2013 M5, AW, black extended merino, BEL Sti-R, Laser Blinder, RKT lip, tint 2011 535i - SOLD 2008 E60 M5 - Gone

12-07-2011, 12:43 AM	#7
bm5bullit First Lieutenant Drives: 2013 BMW M5 Join Date: Jun 2009 Location: Texas Posts: 332 iTrader: (0)	New wheels Can't wait to get these on my car. I had a set of 20" BBS CH-R wheels on my M5 but I can tell from the pics that these wheels will be superior to them. __________________ 2012 Grand Cherokee SRT8 - her car 2013 M5, AW, black extended merino, BEL Sti-R, Laser Blinder, RKT lip, tint 2011 535i - SOLD 2008 E60 M5 - Gone

12-22-2011, 05:59 PM	#10
Suthrn Private Drives: 2011 535i Join Date: Jul 2008 Location: Delaware Posts: 56 iTrader: (0)	Can I get a price for a set of VS8.2 in a 19" setup for my F10? Thanks. __________________ 2011 535i (Grocery Getter) 2009 F250 PS (Toy Hauler) 2007 Searay 270 Amberjack (Toy)

11-18-2011, 03:41 AM	#3
Woobros2win Enlisted Member Drives: 535 x drive M sport Join Date: Aug 2011 Location: Edgewater New Jersey Posts: 40 iTrader: (0)	Could you post more wheel color. I'm interest on these wheels and can't decide which color i should get. Seems like there are many different color rims. Thanks

11-23-2011, 11:38 AM	#4
Rotor head Private Drives: F10 535 Join Date: Nov 2011 Location: Singapore Posts: 49 iTrader: (1)	Very nice ... Please pm quote.. And would like to run 245/20 and 275/20 tires, what kind of offset do you suggest for the 535?

12-07-2011, 12:54 AM	#8
XDEEDUBBX Lieutenant Colonel Drives: 535I Join Date: Mar 2009 Location: Los Angelz Posts: 1,621 iTrader: (10)	sexy..

12-22-2011, 05:42 PM	#9
wheeladdicts Brigadier General Drives: E90 M3 Join Date: Oct 2009 Location: South Florida Posts: 3,131 iTrader: (3)	Holiday special until DEC. 31...PM us with any questions

12-22-2011, 06:01 PM	#11
wheeladdicts Brigadier General Drives: E90 M3 Join Date: Oct 2009 Location: South Florida Posts: 3,131 iTrader: (3)	http://f10.5post.com/forums/showthread.php?t=599968

12-23-2011, 02:16 PM	#12
Hunter5179 Captain Drives: 2013 M6 Coupe Join Date: Nov 2011 Location: Chicago Posts: 648 iTrader: (0)	I PM you for pricing

04-11-2012, 12:20 PM	#14
Carlos@MORR Second Lieutenant Drives: Individual E92 M3 Join Date: Aug 2010 Location: Everywhere Posts: 241 iTrader: (1)	Haven't updated this in a while. Here are a few pics of our MonoForged VS8.2 \| Matte Tinted Brushed: __________________ Web: MORRWheels.com \| Email: Carlos@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET

04-11-2012, 12:21 PM	#15
Carlos@MORR Second Lieutenant Drives: Individual E92 M3 Join Date: Aug 2010 Location: Everywhere Posts: 241 iTrader: (1)	Some weight on the 20" VS8.2 wrapped on 255/30/20 Hankooks. Before: 19" OEM 359 After: 20" MORR VS8.2 This is our 19" Setup for reference: __________________ Web: MORRWheels.com \| Email: Carlos@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET

04-11-2012, 01:02 PM	#16
Alan l. Brigadier General Drives: M-Sport 535xi Join Date: Jun 2009 Location: New York Posts: 3,709 iTrader: (8)	I wonder how brushed would look with regular matte clear __________________ Current - 2013 N55 535xi Msport SAT Retired - 2009 N54 335i Msport 6MT Retired - 2000 M52TU 323i ASA Supercharged 5MT More Photos of my car here

05-07-2012, 03:53 PM	#17
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,547 iTrader: (1)	Bump! We just might have to try that ^^! __________________ Web: MORRWheels.com \| Email: Sales@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search