2010 2011 BMW 5 Series Forum F10
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
 

2010 2011 BMW 5 Series Forum F10 F10 Technical Topics Wheels / Tires / Suspension / Brakes Anyone mounted original M5 343M 20" rims on an F10/F11
Post Reply
 
Thread Tools Search this Thread
      05-18-2012, 04:37 AM   #1
g75y
New Member
 
Drives: F11 528
Join Date: May 2012
Location: The East

Posts: 5
iTrader: (0)

Anyone mounted original M5 343M 20" rims on an F10/F11

From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks
g75y is online now  
0
Reply With Quote
      06-05-2012, 02:18 AM   #2
RR80
Lieutenant
 
RR80's Avatar
 
Drives: F10 535i
Join Date: Nov 2008
Location: Hong Kong, Vancouver

Posts: 479
iTrader: (0)

Quote:
Originally Posted by g75y View Post
From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks
Yes, somebody did it already. I think 275/30/20 would be safe but not sure on the 285 setup.
Attached Images
 
__________________
2003 E60 530i - PSS9 Coilover/M Kit/BBS GT-RS 19" wheels - retired
2006 E91 335i - Procede V5/Forge DV & FMIC/Bastuck quad exhaust/P1 Steering Wheel/Sachs Coilover/M kit/19" RS wheels - retired
2011 F10 535i - Stock

Last edited by RR80; 06-05-2012 at 02:28 AM.
RR80 is offline  
0
Reply With Quote
      06-05-2012, 10:12 PM   #3
marqueex82
Private
 
Drives: BMW future owner
Join Date: Feb 2012
Location: USA

Posts: 96
iTrader: (0)

where's the best place to purchase a set of M5 wheels?
marqueex82 is offline  
0
Reply With Quote
      06-05-2012, 11:21 PM   #4
LACSTER
Major General
 
Drives: white bmw
Join Date: Nov 2007
Location: oc

Posts: 8,017
iTrader: (62)

Quote:
Originally Posted by marqueex82 View Post
where's the best place to purchase a set of M5 wheels?
The dealer would be the only place I can think of to get OEM M5 wheels but they will run you over $4000 for a set of 20's.

There's reps but I can only find 19's

http://f10.5post.com/forums/showthread.php?t=679914
LACSTER is offline  
0
Reply With Quote
      06-06-2012, 12:00 AM   #5
marqueex82
Private
 
Drives: BMW future owner
Join Date: Feb 2012
Location: USA

Posts: 96
iTrader: (0)

Quote:
Originally Posted by LACSTER View Post
The dealer would be the only place I can think of to get OEM M5 wheels but they will run you over $4000 for a set of 20's.

There's reps but I can only find 19's

http://f10.5post.com/forums/showthread.php?t=679914
Thanks cousin! Thanks for that info!!!
marqueex82 is offline  
0
Reply With Quote
      06-06-2012, 04:36 AM   #6
g75y
New Member
 
Drives: F11 528
Join Date: May 2012
Location: The East

Posts: 5
iTrader: (0)

Quote:
Originally Posted by RR80 View Post
Yes, somebody did it already. I think 275/30/20 would be safe but not sure on the 285 setup.

Thanks. It looks good.
g75y is online now  
0
Reply With Quote
      06-06-2012, 11:39 AM   #7
Hunter5179
Lieutenant Colonel
 
Hunter5179's Avatar
 
Drives: 2013 M6 Coupe
Join Date: Nov 2011
Location: Chicago

Posts: 1,514
iTrader: (0)

Did this guy use spacers or just slap them on as is?
__________________
2013 M6 Coupe SG, VSE 003's 21, Akropovic Evo Carbon, KW V3, AMS DP's, Vorsteiner Full Aero, Gruppe M Intake, Bel Stir Plus & V1 with HP Laser Interceptors, P3Cars Gauges, JL 2X12W6Subs, 35%tints.
My Thread:
http://www.6post.com/forums/showthread.php?t=794659
Hunter5179 is offline   United_States
0
Reply With Quote
      06-06-2012, 09:51 PM   #8
RR80
Lieutenant
 
RR80's Avatar
 
Drives: F10 535i
Join Date: Nov 2008
Location: Hong Kong, Vancouver

Posts: 479
iTrader: (0)

Quote:
Originally Posted by Hunter5179 View Post
Did this guy use spacers or just slap them on as is?
I think you don't need to put spacers since the OEM offset for the m5 wheels are on the low side.
__________________
2003 E60 530i - PSS9 Coilover/M Kit/BBS GT-RS 19" wheels - retired
2006 E91 335i - Procede V5/Forge DV & FMIC/Bastuck quad exhaust/P1 Steering Wheel/Sachs Coilover/M kit/19" RS wheels - retired
2011 F10 535i - Stock
RR80 is offline  
0
Reply With Quote
      06-19-2012, 03:53 PM   #9
perisak
Private
 
Drives: 535d
Join Date: Nov 2010
Location: Sweden

Posts: 71
iTrader: (0)

Quote:
Originally Posted by g75y View Post
From what I've read, the original 20" M5 343M rims (Front 9Jx20 ET34 and Rear 10Jx20 ET34) should be able to fit onto the F10 / F11 without rubbing, but was wondering if anyone has actually mounted these on your car and know for sure?

Understand that for the rears in particular, would be advisable to go with PSS tyres (255/35/20 front and 285/30/20 rear) or more conservatively use a 275/30/20 rear tyre?

Thanks
I would also like to know this, and if it also fit the new M550dx?
anyone who know for sure?
perisak is offline  
0
Reply With Quote
      06-19-2012, 07:37 PM   #10
RumbleJay
Private First Class
 
RumbleJay's Avatar
 
Drives: 2011 BMW f10 550i M
Join Date: Mar 2012
Location: Wahoo, Virginia

Posts: 121
iTrader: (2)

Garage List
Just saw some 20's rep on eBay. Item number: 110898538733. Not sure about the quality probably LPC.
RumbleJay is offline  
0
Reply With Quote
      06-19-2012, 08:54 PM   #11
bobblehead
Brigadier General
 
bobblehead's Avatar
 
Drives: warp speed
Join Date: Aug 2009
Location: Toronto, On

Posts: 3,582
iTrader: (0)

Just based on those spec. - the front has no issue at all. The rear is going to be pretty close border line clearing without rubbing. If you intend to lower the suspension later, then for sure, it will rub against the fender.


Quote:
Originally Posted by perisak View Post
I would also like to know this, and if it also fit the new M550dx?
anyone who know for sure?
bobblehead is offline   Canada
0
Reply With Quote
      06-20-2012, 04:21 AM   #12
perisak
Private
 
Drives: 535d
Join Date: Nov 2010
Location: Sweden

Posts: 71
iTrader: (0)

Quote:
Originally Posted by bobblehead View Post
Just based on those spec. - the front has no issue at all. The rear is going to be pretty close border line clearing without rubbing. If you intend to lower the suspension later, then for sure, it will rub against the fender.
How could then ACS sell there wheel kit:
FA: 9,0 x 20" offset 22 with 255/35 R 20
RA: 10,0 x 20" offset 33 with 285/30 R 20

seems like this is very close in the rear as the M5 wheel with ET34.
only 1mm different.
perisak is offline  
0
Reply With Quote
      06-20-2012, 06:01 AM   #13
bobblehead
Brigadier General
 
bobblehead's Avatar
 
Drives: warp speed
Join Date: Aug 2009
Location: Toronto, On

Posts: 3,582
iTrader: (0)

The ACS setup

Front: +5mm from strut/+17mm outward extension
Rear: -2mm from strut/+24mm outward extension

Therefore, I think for rear, that +24mm outward extension is the highest limit that you can go with. Btw, ACS did lowered the car but their springs only lowered about 1 inch without any fender rolling. However, if you are thinking of lowering beyond that reference, there is a good chance it will rub.
bobblehead is offline   Canada
0
Reply With Quote
      06-20-2012, 10:54 AM   #14
Damrong
Registered
 
Drives: F11
Join Date: Jun 2012
Location: Thailand

Posts: 4
iTrader: (0)

Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.
Damrong is offline  
0
Reply With Quote
      06-21-2012, 02:57 AM   #15
perisak
Private
 
Drives: 535d
Join Date: Nov 2010
Location: Sweden

Posts: 71
iTrader: (0)

Quote:
Originally Posted by Damrong
Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.
Xdrive or RWD?

Please post pictures
perisak is offline  
0
Reply With Quote
      06-21-2012, 05:06 AM   #16
remmib
General
 
remmib's Avatar
 
Drives: 2013 F10 520d M-Sport
Join Date: Feb 2006
Location: Norway

Posts: 25,947
iTrader: (0)

Quote:
Originally Posted by Damrong View Post
Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.
Cool, wonder how it looks.
Quote:
Originally Posted by perisak View Post
Xdrive or RWD?

Please post pictures
Same fitment on both xdrive and rwd as far as I know.
__________________

F10 520d M-Sport Alpine White | HRE P43SC 20x9+20x11 | Michelin PSS 255/35+295/30 | KW V3 Coilover | M5 Front Sway Bar + M550d Rear Sway Bar | 3D Design Front Lip | BMW M Performance CF Spoiler | BMW M Performance Diffuser | BMW M Performance Black Grills | BMW M Performance Pedals |
remmib is offline   Norway
0
Reply With Quote
      06-21-2012, 09:34 AM   #17
Damrong
Registered
 
Drives: F11
Join Date: Jun 2012
Location: Thailand

Posts: 4
iTrader: (0)

Sorry I am quite busy today and try to take few picture for you. Picture might not so nice due to I've taken from mobile phone.
Attached Images
     
Damrong is offline  
0
Reply With Quote
      06-21-2012, 09:41 AM   #18
perisak
Private
 
Drives: 535d
Join Date: Nov 2010
Location: Sweden

Posts: 71
iTrader: (0)

Quote:
Originally Posted by remmib
Quote:
Originally Posted by Damrong View Post
Hi Everyone I just install 343M wheels on my F11 MSport Package and tires are 255 35 20 for front and rear are 285 30 20. The offset was just nice without any rubbing eventhough with full loading passenger. Let me wash my car and I will show you few picture afterward.
Cool, wonder how it looks.
Quote:
Originally Posted by perisak View Post
Xdrive or RWD?

Please post pictures
Same fitment on both xdrive and rwd as far as I know.
I've read in other threads that it's best to have 245 in front and 285 at rear if you have xdrive. So it's same diameter. But i'm not sure how important this is.
I wonder if this F11 is lowered..?
perisak is offline  
0
Reply With Quote
      06-21-2012, 09:57 AM   #19
sbrown35
Chief
 
sbrown35's Avatar
 
Drives: 2012 535i M Sport Alpine White
Join Date: Apr 2012
Location: DC

Posts: 58
iTrader: (0)

20" M5 Replica on EBAY

Quote:
Originally Posted by RumbleJay View Post
Just saw some 20's rep on eBay. Item number: 110898538733. Not sure about the quality probably LPC.
Those are only 9.5" width for rear... Real ones are 10" width
__________________
Sean

2012 535i M sport Pkg - HUD - Alpine White w/ Beige
sbrown35 is offline   United_States
0
Reply With Quote
      06-21-2012, 10:44 AM   #20
Damrong
Registered
 
Drives: F11
Join Date: Jun 2012
Location: Thailand

Posts: 4
iTrader: (0)

Mine is 10" for the rear exactly as M5 and it is Forged Rims. Suspension are original I never touch anything.
Damrong is offline  
0
Reply With Quote
      06-21-2012, 11:10 AM   #21
vinred26
Enlisted Member
 
Drives: BMW 5 Series
Join Date: Apr 2012
Location: Columbia

Posts: 35
iTrader: (0)

M6 wheels for 535 2012

Hello Guys,

I have a deal to buy Front : 255/40/19 Rear 285/35/19 wheel and tire set from M6. Wanted to know if any of you have tried to fit 2012 535 Xdrive.

I see tire width as 255 and 285 for M6 whereas most of the staggered I saw for 535 was 245 and 275.

Please let me know your thoughts and experience or suggestions.

Thanks in advance
vinred26 is offline  
0
Reply With Quote
      06-21-2012, 01:35 PM   #22
perisak
Private
 
Drives: 535d
Join Date: Nov 2010
Location: Sweden

Posts: 71
iTrader: (0)

Quote:
Originally Posted by Damrong View Post
Mine is 10" for the rear exactly as M5 and it is Forged Rims. Suspension are original I never touch anything.
Is it original BMW M5 wheel or a copy?
perisak is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:23 AM.




5post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST