F10 535i Avant Garde M368 20" to BBS RX-II 21"

Chu2k · 10-16-2012, 10:23 PM

Hi guys!!!! Just updated my car looks with these BBS!! It was looooove at first sight when I saw them on a 550i M-Sport (I think hes a member here too!)

Soooooo let me show you the Before and After! Maybe it will convice our 20" rolling brothers to go the 21" way too!!

BTW the car is lowered on Eibachs

BEFORE PICS:

Chu2k · 10-16-2012, 10:35 PM

AFTER:

As you can see in the pics, it rubs a little bit

. I seems that the Michelin PSS are a bit too wide, but also the rears are 10.5 ET 28 (yes, it should be 30 but these were the last set available at any of the BBS dealers in the US). What are my options? Fender rolling? Negative Camber?

Chu2k · 10-16-2012, 10:37 PM

I personally LOVE this pic at the car wash!!

And never get tired of seeing those wide tires...

Chu2k · 10-16-2012, 10:38 PM

I know there's still much to be improved, like a lip, diffuser and quad exhausts. But that will come in due time hehehe

HOPE YOU LIKE MY BABY

LACSTER · 10-16-2012, 10:57 PM

Negative camber would be the only way to go with those tires due to them being so square.

I myself just got some new MORR 21's and the offset if super aggressive

Here's a peek of what it looks like

Nobleman · 10-16-2012, 11:15 PM

Quote:

Originally Posted by LACSTER

Negative camber would be the only way to go with those tires due to them being so square.

I myself just got some new MORR 21's and the offset if super aggressive

Here's a peek of what it looks like

Chu2k · 10-16-2012, 11:30 PM

Quote:

Originally Posted by LACSTER

Negative camber would be the only way to go with those tires due to them being so square.

I myself just got some new MORR 21's and the offset if super aggressive

Here's a peek of what it looks like

Ohhhhh you Lacster! As always you are a BEAST!!

What tires are those?? So I get them after I chew through these Michelins

LACSTER · 10-16-2012, 11:37 PM

Quote:

Originally Posted by Chu2k

Ohhhhh you Lacster! As always you are a BEAST!!

What tires are those?? So I get them after I chew through these Michelins

Hahaha thanks man. I'll have better pics up once the photoshoot it done.

I'm currently running Toyo Proxes T1R's in a 295/25/21. It's kind of hard to tell but the wheels stick out about half an inch and I'm running no camber just a few extra bump stops to avoid it from bottoming out and rubbing.

Believe it or not I don't rub even with people in the car because of those bumps stops.

Chu2k · 10-17-2012, 03:40 AM

Ohhh right, Toyos usually strech quite well, but yours has quite a unique shape lol. And its veeeery clear that the rears stick out over an inch! Way more agressive than your previous iForgeds.

UAM951 · 10-17-2012, 08:45 AM

Quote:

Originally Posted by LACSTER

Negative camber would be the only way to go with those tires due to them being so square.

I myself just got some new MORR 21's and the offset if super aggressive

Here's a peek of what it looks like

Oh my....

TF_F10-520d · 10-17-2012, 10:15 AM

Quote:

Originally Posted by Chu2k

I personally LOVE this pic at the car wash!!

And never get tired of seeing those wide tires...

Looks great, but why is your PSS tire having a different threadpattern than mine? I have 295/30-R20 mine looks more rounded at the edges.

the infamous... · 10-17-2012, 11:28 AM

dayum! beefy setup, really like these rxii's

remmib · 10-17-2012, 01:02 PM

Quote:

Originally Posted by Chu2k

AFTER:

As you can see in the pics, it rubs a little bit

. I seems that the Michelin PSS are a bit too wide, but also the rears are 10.5 ET 28 (yes, it should be 30 but these were the last set available at any of the BBS dealers in the US). What are my options? Fender rolling? Negative Camber?

Awesome wheels.

I assume those are 295/25/21 in the rear, very aggressive with ET28.

remmib · 10-17-2012, 01:05 PM

Quote:

Originally Posted by TF_F10-520d

Looks great, but why is your PSS tire having a different threadpattern than mine? I have 295/30-R20 mine looks more rounded at the edges.

I guess the edge is different because of the different profile, but aren't the tread pattern the same? Any pics.

Radamez · 10-17-2012, 01:06 PM

Just downright sick!!

Chu2k · 10-17-2012, 02:11 PM

Quote:

Originally Posted by TF_F10-520d

Looks great, but why is your PSS tire having a different threadpattern than mine? I have 295/30-R20 mine looks more rounded at the edges.

Quote:

Originally Posted by remmib

I guess the edge is different because of the different profile, but aren't the tread pattern the same? Any pics.

THanks!

Yeah probably thats the reason. These are 295/25/21

Chu2k · 10-17-2012, 02:13 PM

Quote:

Originally Posted by the infamous...

dayum! beefy setup, really like these rxii's

Thanks bro!! They are not aggresive looking, rather they are veeery classy. Thats what I love about them hehehe

And believe me, in load conditions, they are not beffy at all LMAO!

Chu2k · 10-17-2012, 02:16 PM

Quote:

Originally Posted by remmib

Awesome wheels.

I assume those are 295/25/21 in the rear, very aggressive with ET28.

Bullseye sir! Did not think that would make such a difference being ET28 (20" were ET30) but I love it! Anxious to see how it looks after a little bit of camber

Chu2k · 10-17-2012, 02:17 PM

Quote:

Originally Posted by Radamez

Just downright sick!!

Thanks bro!! But im definitely average here LOL!

TF_F10-520d · 10-17-2012, 03:09 PM

Quote:

Originally Posted by Chu2k

Quote:

Originally Posted by TF_F10-520d

Looks great, but why is your PSS tire having a different threadpattern than mine? I have 295/30-R20 mine looks more rounded at the edges.

Quote:

Originally Posted by remmib

I guess the edge is different because of the different profile, but aren't the tread pattern the same? Any pics.

THanks!

Yeah probably thats the reason. These are 295/25/21

image by TF_F10-520d, on Flickr

Picture of my tire. Lokke like the three grooves are wider on my tires and the fourth is thinner. (The outer)

Also look at this from the M5

BMW M5 - Michelin Pilot Super Sport by rezulteo, on Flickr

remmib · 10-17-2012, 03:28 PM

Quote:

Originally Posted by TF_F10-520d

Picture of my tire. Lokke like the three grooves are wider on my tires and the fourth is thinner. (The outer)

Thanks for posting the pic, interesting difference.

Chu2k · 10-17-2012, 07:00 PM

Heres a better pic of my tires too for comparisson

10-16-2012, 10:23 PM	#1
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	F10 535i Avant Garde M368 20" to BBS RX-II 21" Hi guys!!!! Just updated my car looks with these BBS!! It was looooove at first sight when I saw them on a 550i M-Sport (I think hes a member here too!) Soooooo let me show you the Before and After! Maybe it will convice our 20" rolling brothers to go the 21" way too!! BTW the car is lowered on Eibachs BEFORE PICS:
	Tweet

10-17-2012, 11:28 AM	#12
the infamous... Lieutenant General Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka DAWNTOWN Posts: 16,890 iTrader: (0)	dayum! beefy setup, really like these rxii's __________________ "simple is clean" -The ///ModFather [ iND ] - [ eAs ] - [ ACM ] - [ LTMW ] - [ AA ]

10-17-2012, 01:06 PM	#15
Radamez Second Lieutenant Drives: 2011 535 XDrive / Imperial Blu Join Date: Mar 2012 Location: Northern NJ Posts: 200 iTrader: (0)	Just downright sick!! __________________ 1997 Acura CL (Red w/gray leather - sold) 2007 350Z (Chrome Silver w/orange leather - sold) 2010 335 Xdrive Coupe (black w/red leather - sold)2011 535 Xdrive (Imperial Blue w/oyester leather)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-16-2012, 10:35 PM	#2
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	AFTER: As you can see in the pics, it rubs a little bit . I seems that the Michelin PSS are a bit too wide, but also the rears are 10.5 ET 28 (yes, it should be 30 but these were the last set available at any of the BBS dealers in the US). What are my options? Fender rolling? Negative Camber?

10-16-2012, 10:37 PM	#3
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	I personally LOVE this pic at the car wash!! And never get tired of seeing those wide tires...

10-16-2012, 10:38 PM	#4
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	I know there's still much to be improved, like a lip, diffuser and quad exhausts. But that will come in due time hehehe HOPE YOU LIKE MY BABY

10-16-2012, 10:57 PM	#5
LACSTER Major General Drives: AW F10 & E93 Join Date: Nov 2007 Location: Orange County, Ca Posts: 6,499 iTrader: (57)	Negative camber would be the only way to go with those tires due to them being so square. I myself just got some new MORR 21's and the offset if super aggressive Here's a peek of what it looks like

10-17-2012, 03:40 AM	#9
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	Ohhh right, Toyos usually strech quite well, but yours has quite a unique shape lol. And its veeeery clear that the rears stick out over an inch! Way more agressive than your previous iForgeds.

10-17-2012, 07:00 PM	#22
Chu2k Private Drives: F10 535i, X1 xDrive20d Join Date: Oct 2011 Location: Paraguay Posts: 68 iTrader: (0)	Heres a better pic of my tires too for comparisson