V1 placement

ajandhek · 11-02-2012, 09:59 AM

anyone know where the best spot to put the valentine 1 cause BMWs glass has a tint or whatever that doesn't go though

harrisfb · 11-02-2012, 10:40 AM

I put mine tucked in right above the rear view mirror, drivers side. It fits in really nice there and does not obstruct your field of view. Also it allows you to keep it kind of stealth while allowing almost full use of the sun visor/mirror. And a good location to hardwire it right to your sunroof wiring. I have no issues with tint causing interference.

1HOT BMR · 11-02-2012, 10:51 AM

IMO this is the best spot for it:

No interference of any kind

ajandhek · 11-02-2012, 11:48 AM

thank you

EV0LVE · 11-03-2012, 12:21 AM

Forget the v1. I wanna see more of that yellow n-s-sex.

wdimagineer · 11-03-2012, 03:15 AM

Quote:

Originally Posted by 1HOT BMR

IMO this is the best spot for it:

No interference of any kind

Does it really work well up there? I'm about to buy a detector and thought that location would be impaired. Good to know.

ajandhek · 11-03-2012, 02:57 PM

I traveled 400 miles yesterday and I had the v1 up by the rear view and it worked like a charm

1HOT BMR · 11-03-2012, 09:37 PM

Quote:

Originally Posted by EV0LVE

Forget the v1. I wanna see more of that yellow n-s-sex.

1HOT BMR · 11-03-2012, 09:42 PM

Quote:

Originally Posted by wdimagineer

Does it really work well up there? I'm about to buy a detector and thought that location would be impaired. Good to know.

It's perfect. There is like a small indentation on the liner that fits the V1 just right. If you place the suction cups really close to the top of the windshield it does not interfere with the visor operation or the view of the passenger. It's also easy to reach from the driver's seat.

wdimagineer · 11-03-2012, 11:55 PM

Quote:

Originally Posted by 1HOT BMR

Quote:

Originally Posted by wdimagineer

Does it really work well up there? I'm about to buy a detector and thought that location would be impaired. Good to know.

It's perfect. There is like a small indentation on the liner that fits the V1 just right. If you place the suction cups really close to the top of the windshield it does not interfere with the visor operation or the view of the passenger. It's also easy to reach from the driver's seat.

Awesome to know. Thank you.

11-02-2012, 09:59 AM	#1
ajandhek Private Drives: none Join Date: Jun 2012 Location: pittsburgh Posts: 85 iTrader: (0)	V1 placement anyone know where the best spot to put the valentine 1 cause BMWs glass has a tint or whatever that doesn't go though
	Tweet

11-02-2012, 10:40 AM	#2
harrisfb New Member Drives: 2012 550i MSport 6MT Join Date: May 2012 Location: PA Posts: 16 iTrader: (0)	I put mine tucked in right above the rear view mirror, drivers side. It fits in really nice there and does not obstruct your field of view. Also it allows you to keep it kind of stealth while allowing almost full use of the sun visor/mirror. And a good location to hardwire it right to your sunroof wiring. I have no issues with tint causing interference. __________________ 2012 550i MSport 6MT - Dinan S3 - Imperial Blue Metalic/Everest Gray - 20" 373M Wheels

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-02-2012, 10:51 AM	#3
1HOT BMR First Lieutenant Drives: 2011 550i 6 sp +'12 35d Join Date: Aug 2010 Location: California Posts: 310 iTrader: (0)	IMO this is the best spot for it: No interference of any kind

11-02-2012, 11:48 AM	#4
ajandhek Private Drives: none Join Date: Jun 2012 Location: pittsburgh Posts: 85 iTrader: (0)	thank you

11-03-2012, 12:21 AM	#5
EV0LVE Lieutenant Drives: F10 535i SG Join Date: Dec 2010 Location: So Cal Posts: 598 iTrader: (0)	Forget the v1. I wanna see more of that yellow n-s-sex.

11-03-2012, 02:57 PM	#7
ajandhek Private Drives: none Join Date: Jun 2012 Location: pittsburgh Posts: 85 iTrader: (0)	I traveled 400 miles yesterday and I had the v1 up by the rear view and it worked like a charm