2010 2011 BMW 5 Series Forum F10
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
 

2010 2011 BMW 5 Series Forum F10 F10 Technical Topics DIY Guides & Discussions Simple DIY: Debadging /Repainting Rear Emblems
Post Reply
 
Thread Tools Search this Thread
      09-06-2012, 11:41 PM   #1
Aaron@Autosource
 
Aaron@Autosource's Avatar
 
Drives: '12 Space Grey 535i M-Sport
Join Date: Aug 2012
Location: Sunny Socal

Posts: 72
iTrader: (0)

Simple DIY: Debadging /Repainting Rear Emblems

Pretty & straightforward DIY

Thought I'd post it up for the few who have never done this before or are afraid too haha. I know you're out there.

This is as simple as DIY projects get. If somehow this doesnt come out right for you, you're probably not cut out for DIY's

Time: 2 hours max

Tools:
  1. Xacto Knife
  2. Dental Floss
  3. Heatgun/Blowdryer
  4. 3M Heavy Duty Double Sided Tape
  5. Coating/Paint of Your Choice
  6. Masking/Painters Tape

Total Cost: Less than $20(depending on what you already have around the house)


Notes:
-I definitely suggest an Xacto(fine point) over any regular razor blade bc if will make cutting thin pieces of the 3M tape MUCH easier when it comes time to apply them to the back of the emblems.

-I got lazy and only taped above and below where the emblems originally were. Im 99% sure my spacing between the emblems is a bit off after I reinstalled them. I would put tape between each emblem prior to removing them to make sure you have the spacing right.



1.) Put the tape on, make sure the lines are straight so your emblems wont come out crooked. I had already removed the "i" before I decided to to the DIY..sorry about that





2.) Use your heatgun or blowdryer to slowly heat up the area around the emblems. Careful not to hold it there too long and damage your paint. I used the lowest setting on my heatgun.


3.) Bust out your floss and start running it behind the emblems. Once the area is heated up the floss should slide through the adhesive pretty easily. Reheat if needed the area if needed.






4.) Clean the remaining adhesive off the back of your emblems and on the trunk of the car the best you can. You probably wont get them off 100% from the back of the emblems but the cleaner you can get them, the better. I used Goo-Gone to get most of the residue off and followed up with brake cleaner to remove that oily surface that Goo-Gone leaves.




5.) Clean and dry then emblems off, and cut the 3M double sided tape into pieces thin enough to apply on the back of the emblems how the OEM adhesive originally was.


6.) Now you can paint them. I chose Plastidip b/c it requires zero prep work aside from cleaning the surface. No sanding required, and 100% reversible. Leaves a matte black finish, looks great with Space Grey or AW, other lighter colors, etc. $6 at local hardware stores. Do 2-3 coats allowing 15 minutes in between each coat, and let the final coat sit for 30 mins or so before handling/reinstalling.






7.) Peel all the red backing off the 3M tape from the back of your emblems. Reinstall using your masking/painters tape gridlines. I prefer to heat the back of the emblems before installing b/c the heat helps the 3M tape stick better. Personal preference/habit, not 100% necessary.






After you've lined up and reinstalled the emblems, you're done. If you're only debadging, you only need to follow steps #2 & #3.


Finished








Have fun!
Aaron@Autosource is offline  
0
Reply With Quote
      09-30-2012, 04:45 AM   #2
stroyer
New Member
 
Drives: 2012 F10 530d
Join Date: Sep 2012
Location: India

Posts: 17
iTrader: (0)

Thanks a lot! I'm a DIY and BMW newbie, and had always wondered how this was done...had imagined a more complicated procedure...I was thinking about debadging at first, but after seeing these pictures I think repainting it black looks really cool!

I have an Alpine White car and I think black would look quite good on it...

Again, thank you!
stroyer is offline   India
0
Reply With Quote
      01-19-2013, 09:12 AM   #3
mwlmd
Major
 
mwlmd's Avatar
 
Drives: F10 M5
Join Date: May 2009
Location: Portland, OR

Posts: 1,214
iTrader: (0)

Nice work. But if you are using plasti dip can't you just paint the badge on the car without removing it?
__________________
F10 M5
Alpine/Sakhir/Anthracite/DCT

HRE P101. Akrapovič evolution. H&R. Bell StiR+ Laser Interceptor quad. IND cosmetics. 3M CR50.
mwlmd is offline   United_States
0
Reply With Quote
      01-22-2013, 09:33 AM   #4
528imsport
Major
 
528imsport's Avatar
 
Drives: Msport
Join Date: Nov 2006
Location: uk

Posts: 1,196
iTrader: (0)

Nice I did my in smoke black
528imsport is offline   United Kingdom
0
Reply With Quote
      01-30-2013, 06:37 PM   #5
Gixxer335iCoupe
First Lieutenant
 
Gixxer335iCoupe's Avatar
 
Drives: Over Slow Children at Play
Join Date: Jun 2007
Location: Florida

Posts: 365
iTrader: (0)

Quote:
Originally Posted by mwlmd View Post
Nice work. But if you are using plasti dip can't you just paint the badge on the car without removing it?
That is how I understand it.

If you were going gloss black, then you might need to remove them...
Gixxer335iCoupe is offline  
0
Reply With Quote
      01-31-2013, 06:05 PM   #6
omer
Lieutenant
 
Drives: 2013 535i xdrive Msport
Join Date: Jul 2012
Location: United States

Posts: 417
iTrader: (0)

Quote:
Originally Posted by Gixxer335iCoupe
Quote:
Originally Posted by mwlmd View Post
Nice work. But if you are using plasti dip can't you just paint the badge on the car without removing it?
That is how I understand it.

If you were going gloss black, then you might need to remove them...
You are 100% right if you have to use the gloss you have to remove them. If use only plasti dip then you don't.
omer is offline   United_States
0
Reply With Quote
      03-14-2013, 12:37 PM   #7
cyberbman
New Member
 
Drives: 5 series
Join Date: Feb 2013
Location: SoCal / NoVa

Posts: 5
iTrader: (0)

Wow.. Thanks for sharing. Will try debadging this weekend.
cyberbman is offline   United_States
0
Reply With Quote
      03-24-2013, 06:26 AM   #8
Approver
New Member
 
Drives: F10
Join Date: Mar 2013
Location: Europe

Posts: 6
iTrader: (0)

Nice! Thanks for posting this.
Approver is offline  
0
Reply With Quote
      03-25-2013, 01:08 PM   #9
twelve535i
Lieutenant
 
Drives: 2012 535i xDrive
Join Date: Feb 2013
Location: New York

Posts: 448
iTrader: (2)

Looks great.
twelve535i is offline  
0
Reply With Quote
      10-14-2013, 03:27 PM   #10
gre8tw8LL
Private First Class
 
Drives: 2012 F10 535i
Join Date: Feb 2011
Location: NorCal

Posts: 164
iTrader: (0)

Great Write up
__________________
2012 535i Alpine White | Oyster Black Dakota Interior | Hamann Front Lip | LiteSpeed Catback Exhaust | M5 Diffuser| Painted Calipers & Reflectors | Black Gloss Grill | LED interior lights | Piaa Plasma Yellow Foglights | Born on 1/30/12
gre8tw8LL is offline  
0
Reply With Quote
      10-17-2013, 10:39 AM   #11
badblack550xi
Major
 
badblack550xi's Avatar
 
Drives: F10 550xi 2013
Join Date: May 2013
Location: NJ

Posts: 1,050
iTrader: (0)

you can plasti dip them with out removal, it will peel right off around the badges.
badblack550xi is offline  
0
Reply With Quote
      10-17-2013, 09:28 PM   #12
528imsport
Major
 
528imsport's Avatar
 
Drives: Msport
Join Date: Nov 2006
Location: uk

Posts: 1,196
iTrader: (0)

Quote:
Originally Posted by badblack550xi View Post
you can plasti dip them with out removal, it will peel right off around the badges.
No way
you can do it but will take many hours just to mask out the paint work and you might scratch the paint work too.
Dont do it
528imsport is offline   United Kingdom
0
Reply With Quote
      10-17-2013, 10:00 PM   #13
badblack550xi
Major
 
badblack550xi's Avatar
 
Drives: F10 550xi 2013
Join Date: May 2013
Location: NJ

Posts: 1,050
iTrader: (0)

Quote:
Originally Posted by BMWZone528 View Post
No way
you can do it but will take many hours just to mask out the paint work and you might scratch the paint work too.
Dont do it
what? i think you are not understanding what iam saying here is a DIY:

badblack550xi is offline  
0
Reply With Quote
      10-17-2013, 10:12 PM   #14
528imsport
Major
 
528imsport's Avatar
 
Drives: Msport
Join Date: Nov 2006
Location: uk

Posts: 1,196
iTrader: (0)

Quote:
Originally Posted by badblack550xi View Post
what? i think you are not understanding what iam saying here is a DIY:

I know what you saying but no need to cut round the logo to peel it off?
528imsport is offline   United Kingdom
0
Reply With Quote
      10-17-2013, 10:17 PM   #15
badblack550xi
Major
 
badblack550xi's Avatar
 
Drives: F10 550xi 2013
Join Date: May 2013
Location: NJ

Posts: 1,050
iTrader: (0)

Quote:
Originally Posted by BMWZone528 View Post
I know what you saying but no need to cut round the logo to peel it off?
nope just peel it right off.
badblack550xi is offline  
0
Reply With Quote
      10-17-2013, 10:49 PM   #16
528imsport
Major
 
528imsport's Avatar
 
Drives: Msport
Join Date: Nov 2006
Location: uk

Posts: 1,196
iTrader: (0)

Quote:
Originally Posted by badblack550xi View Post
nope just peel it right off.
when you DIY post a video
528imsport is offline   United Kingdom
0
Reply With Quote
      10-18-2013, 08:24 AM   #17
badblack550xi
Major
 
badblack550xi's Avatar
 
Drives: F10 550xi 2013
Join Date: May 2013
Location: NJ

Posts: 1,050
iTrader: (0)

Quote:
Originally Posted by BMWZone528 View Post
when you DIY post a video
badblack550xi is offline  
0
Reply With Quote
      04-01-2014, 05:49 PM   #18
e60rocks
Private First Class
 
Drives: 07 E60
Join Date: Aug 2010
Location: ST Paul, mn

Posts: 103
iTrader: (0)

Garage List
Nice write up
e60rocks is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:24 AM.




5post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST