[Hunter399]

Curious if the 2013 m6 (20s) wheels will fit on the 550i.

Searched around but found nothing.

Thanks!

[TF_F10-520d]

If you mean the 343M wheels that Are for M5/M6 then yes i think they will fit. They are 20x9" ET 34 front and 20x10" ET 34 rear. M6/M5 use 265 tires in front and 295 rear but the M5 has slightly wider front fenders so you might want to go 255 in front. No problem with 295 rear cause rear fenders are same as M5.

I have 20x9" ET35 BBS CH-R in front with 255 tire and its completely Flush with fenders.

[remmib]

I'm gonna say no, since the rear M6 wheels are 20x10.5" ET19, while M5 rears are 20x10" ET34.

The M5 and M6 343M looks the same, but as you see, the M6 wheels has a much lower offset.

[TF_F10-520d]

Ok didnt know that. Tried to find some info. But the 343M wheels for the M5 will work on the 550i for sure. 10,5 ET 19 will be way outside the fenders of the 550i.

[edunmore]

Does anyone know if a 305/30r20, ET35 will fit on the rear.

I'm looking to put a set of these K3 Projekt F2(s) on my 550i M-Spt. Not looking for anything that going to stick out from under the fender. Besides the 295's are my backup.

[MELLOWYELLOW06]

If we could put 305 out back, that would be great.

I have a ne set of 255 35 and 305 30 T1R that I could use on a 20

I had 285 on a 20x10 38 offset and it looked awfully close

[ATOMBOY]

Originally Posted by edunmore

Does anyone know if a 305/30r20, ET35 will fit on the rear.

I'm looking to put a set of these K3 Projekt F2(s) on my 550i M-Spt. Not looking for anything that going to stick out from under the fender. Besides the 295's are my backup.

Nice looking wheels!