|
|
10-09-2019, 12:19 PM | #1 |
New Member
3
Rep 8
Posts |
Parking Sensor Help
I recently installed MB Quart 200.3 speakers with a MB quart NSC475 amp. After installation my parking sensors stopped working. I used a t harness to add the new amp. I have tried connecting without the amp but the sensors still dont work. What should i do?
13 plate 530D M Sport |
10-11-2019, 12:15 PM | #3 |
New Member
3
Rep 8
Posts |
Had it scanned with a snap on tool, it gave codes like 803216, 80321C, 803234, etc for all 8 sensors. It didnt say anything about the module itself. The fuse seems to be fine too.
|
Appreciate
0
|
10-12-2019, 07:03 AM | #6 |
Captain
461
Rep 659
Posts |
There are a number of them out there depends on how much you want to spend.
I hear the Foxwell 5 series is good. Use www.realoem.com for part numbers. www.newtis.info for procedures. |
Appreciate
0
|
10-16-2019, 02:07 PM | #7 |
New Member
3
Rep 8
Posts |
Hey man thanks for the reply. According to the site the parking module should be on the boot floor next to the battery. When I had a look today all i could find was the module for the parking brake and the module for the fuel pump. Where else could it be located? Thanks
|
Appreciate
0
|
10-16-2019, 04:19 PM | #9 |
New Member
3
Rep 8
Posts |
Yeah I put my vin in. Had a word with a local Beemer breaker who said it should be located there too. Looks like someone may have moved it. I just want my parking sensors to work lol.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|