|
|
|
2010 2011 BMW 5 Series Forum F10 What's the name of the part where a Fuel Injector Wiring goes into? |
|
Post Reply |
|
Thread Tools | Search this Thread |
12-31-2023, 01:45 PM | #1 |
Private First Class
86
Rep 152
Posts |
What's the name of the part where a Fuel Injector Wiring goes into?
Hello everyone,
I am assisting my relative to fix her valve cover + gasket and it's super dirty oily which resulted in a broken plastic part that holds the Fuel Injector Wiring (just the part where it locks) The location below circled in red is where the connector/wiring goes into and i wanted to ask the community if anyone here is familiar with this part. View post on imgur.com View post on imgur.com My best guess was '13907636145' but the diagram in the RealOEM only showed 3 (whereas there are 4) so I am just really uncertain. View post on imgur.com Is anyone familiar with this part by any chance? Last edited by watchout-everyone; 12-31-2023 at 04:02 PM.. |
12-31-2023, 06:15 PM | #2 |
Captain
583
Rep 829
Posts |
What you circled in the 1st two pictures is the connector on the actual fuel injector as shown below...and I've circled in red.
|
Appreciate
2
watchout-everyone85.50 StradaRedlands4940.50 |
12-31-2023, 06:19 PM | #3 | |
Captain
583
Rep 829
Posts |
Quote:
13907636145 is NOT what you have circled in your photos. Last edited by M_Bimmer; 12-31-2023 at 09:07 PM.. |
|
Appreciate
1
StradaRedlands4940.50 |
01-01-2024, 02:20 PM | #4 | |
Private First Class
86
Rep 152
Posts |
Quote:
Fuel Injector: (https://www.fcpeuro.com/products/bmw...639994#fitment) Fuel Injector Removal Tool (I didn't know i needed this): https://www.amazon.com/gp/product/B0...0AY8CJU0&psc=1 Before I replace it, would it be safe to drive the car for a week? When I inserted in the fuel injector wiring/connector to it, it doesn't exactly feel "loose" when I try to pull it back out so I think it'd be okay but any confirmation or feedback will be great. |
|
Appreciate
1
StradaRedlands4940.50 |
01-01-2024, 02:40 PM | #5 | |
Colonel
4941
Rep 2,995
Posts
Drives: 2006 BMW 330i MT
Join Date: Dec 2021
Location: SoCal
iTrader: (2)
Garage List 2006 BMW 330i [8.21]
2009 BMW 328i Touri ... [7.90] 2013 BMW X5 35i [7.63] 2011 BMW 528i [8.75] 2006 Mazda3 [5.50] |
Quote:
|
|
Appreciate
1
watchout-everyone85.50 |
01-01-2024, 03:20 PM | #6 | |
Captain
583
Rep 829
Posts |
Quote:
I'd zip tie the wiring harness to the top of the injector after you make the electrical connection to the injector, and call it a day. You just want to keep the electrical connector connected under vibration of the engine, so a zip tie should suffice. Last edited by M_Bimmer; 01-01-2024 at 06:07 PM.. |
|
Appreciate
2
StradaRedlands4940.50 watchout-everyone85.50 |
01-01-2024, 07:16 PM | #7 |
Private First Class
86
Rep 152
Posts |
|
Appreciate
0
|
01-01-2024, 07:17 PM | #8 | |
Private First Class
86
Rep 152
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|