|
|
05-30-2017, 12:55 AM | #1 |
Private First Class
21
Rep 140
Posts |
N63 Charge pipe size?
My Passenger side charge pipe seems to have an ever so small cut in it.
So I want to have the hose replaced/changed. Before removing the clamps from the intercooler. Does anyone know the inlet size for the charge pipe or the Turbo side? I I intend on replacing the charge pipe with couplers on each end and a hard pipe in between. Similar to the m5 setup. I know the clamp for the intercooler is 72mm(2.83") So I'm assuming the inlet is 2.75". But guessing on the turbo outlet size, I Think it is 2.0" I know they dont make any options like they do for the m5 (https://www.x-ph.com/burger-tuning-b...th-meth-bungs/) Let me know if anyone has anymore info on this, or has it been done before. Or is it a waste of time and try to source a stock charge pipe. Thanks in advance. |
05-31-2017, 05:08 AM | #2 |
Private First Class
21
Rep 140
Posts |
For those that are interested.
The intercooler side is just below a 2.5". Closer to a 2.25" but a 2.5" coupler with a clamp will seal. On the turbo charger side its 1.75" Im still going to play around with the idea of changing it out. We will see. |
Appreciate
0
|
06-21-2017, 09:17 PM | #6 |
First Lieutenant
90
Rep 333
Posts |
I don't think there is room in there for the new ICs. They appear to be closer to M5 sized. The Stock N63 is tight fit, the Alpina/Dinan ones are ~25% larger and take up all the extra room.
The N63Tu Alpina ICs are probably the most ideal setup due to the molded/cast ducting in stead of chargepipe. Matt
__________________
2011 Space Grey 550i - Eisenmann exhaust, ACS Springs, Dinan Intercoolers, Intake, & Stage 5 tune
2011 Space Grey 335i - M Performance exhaust - Wifes Past: 2000 Avus Blue M5 - Dinan exhaust, flywheel, & tune 180k+miles |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|