|
|
07-21-2011, 10:05 AM | #1 |
Private
14
Rep 57
Posts |
TPM Sensor Issues
I just bought new wheels for my 2011 535i with TPM sensors. When I go through the iDrive to the reset TPM the reset option is grayed out. I can't select it. Couple questions... How can I ensure that the company I bought the wheels from did in fact install the TPMs I ordered? Is there something else I need to do to reset the TPMs? What options do I have to troubleshoot this?
Thanks in advance for all your help. |
07-21-2011, 10:55 AM | #2 |
Major
116
Rep 1,346
Posts
Drives: 2011 E92 335 M-Sport
Join Date: Feb 2010
Location: LA
|
Rut Roh.
if you bot aftermkt wheels and sensors, you likely bot the wrong sensors, which means you have to take the tires off the rims and have new sensors installed. I'm not sure if you can tell if the sensors are installed because they sit inside the rims. Typically, presence of a metal clamp-in valve identifies the presence of a direct tire pressure monitoring system, but it's not always the case.
__________________
|
Appreciate
0
|
07-21-2011, 01:06 PM | #3 |
Private
14
Rep 57
Posts |
That is what I thought. After doing more research, I discovered that the sensors that the company installed where for the the right make model and year of my car, but not the build date. 2011 535i's built before Sept 2010 use a different Mhz.
|
Appreciate
0
|
08-03-2011, 02:13 PM | #9 |
Private
14
Rep 57
Posts |
Haha! Right... Here is a horrible photo a co-worker posted on FB.
I ended up getting 20" Concept One Executive Wheels RS-8 Hyper Silver with Chrome Lip. I couldn't be happier with the look. I opted for the staggered 8.5 and 10's in the back. They really look sharp. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|