BMW F10 Coding DIY (and other Fxx models)

shawnsheridan · 08-16-2016, 06:19 PM

Quote:

Originally Posted by NV GUNS

I don't know what happened to it. It's not there.

If CAFD is missing or corrupt, you must Inject new CAFD into ECU and VO Code it:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on HKFM => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on HKFM (the ECU itself not the underlying CAFD) => Select CODE.

Bmw doubles · 08-20-2016, 04:32 PM

Quote:

Originally Posted by sunnytailor

Hi All,

I have sucessfully coded a few things on my 640D GC 2013 but i am strugging with a few

I cant seem to get cluster set to white at all time and i cant get my mirror to fold on one click. i have used the following

****************************************
SIDE MIRROR CLOSING W/ KEYFOB
****************************************
FRM / 3020 / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> aktiv / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_FB -> activ / Werte=01
CAS / 3003 / KOMFORTSCHLIESSUNG_PA -> activ / Werte=01

****************************************
White Cluster at night
****************************************

KOMBI 3007 DIM_NACHT_EIN Werte: FF

thanks

Hey I tried the white cluster and didn't work for me. Is there another area I have to code?

Almaretto · 08-26-2016, 01:58 PM

Quote:

Originally Posted by Bmw doubles

Hey I tried the white cluster and didn't work for me. Is there another area I have to code?

Does not work on newer firmware.

paul223 · 08-28-2016, 11:59 AM

I have a hard drive plug in USB port with 700 video songs, but it will only go up to 500th song. See pic. How do I remove this limitation?

Stück · 08-28-2016, 05:33 PM

Browse the directory, it will then find everything on there after.

I have 1500 FLAC files on my USB stick, it sees them all just fine.

suitepee · 08-28-2016, 08:38 PM

Thanks for all the information guys -- Just did my first session and am hooked! Already was able to turn off landing disclaimer, show PSI on tires, disable driver seatbelt gong.

However I used the cheat sheet to set the folding mirrors, and set the below:

CAS / KOMFORTSCHLIESSUNG_FB = aktiv (01)
CAS / KOMFORTSCHLIESSUNG_PA = aktiv (01)

But that functionality does not work. I also tried to hold 2 seconds and still doesn't work.

Anyone have any tips to get that piece working to fold in mirrors on lock / fold out on unlock? I do have the comfort access package.

Thanks!

shawnsheridan · 08-28-2016, 08:50 PM

Quote:

Originally Posted by suitepee

Thanks for all the information guys -- Just did my first session and am hooked! Already was able to turn off landing disclaimer, show PSI on tires, disable driver seatbelt gong.

However I used the cheat sheet to set the folding mirrors, and set the below:

CAS / KOMFORTSCHLIESSUNG_FB = aktiv (01)
CAS / KOMFORTSCHLIESSUNG_PA = aktiv (01)

But that functionality does not work. I also tried to hold 2 seconds and still doesn't work.

Anyone have any tips to get that piece working to fold in mirrors on lock / fold out on unlock? I do have the comfort access package.

Thanks!

You have to also code FRM => ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

suitepee · 08-28-2016, 08:53 PM

Quote:

Originally Posted by shawnsheridan

You have to also code FRM => ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

Whoops forgot to say I did turn that on before coding the previous two.

Worth mentioning, when I did turn the values on KOMFORTSCHLIESSUNG_FB / PA, i had to overwrite the 00 to 01 on both, and one was already set to "aktiv".

I got a success message after uploading, but I will look again tomorrow to make sure the values stuck.

shawnsheridan · 08-28-2016, 09:01 PM

Quote:

Originally Posted by suitepee

Whoops forgot to say I did turn that on before coding the previous two.

Worth mentioning, when I did turn the values on KOMFORTSCHLIESSUNG_FB / PA, i had to overwrite the 00 to 01 on both, and one was already set to "aktiv".

I got a success message after uploading, but I will look again tomorrow to make sure the values stuck.

No, that is your problem, You should not have changed the Werte Value for those. Aktiv is all that is needed, and now they are meesed up. You need to VO Code CAS to reset it, then go back and make sure these are aktiv, and leave Werte Values alone.

suitepee · 08-28-2016, 10:36 PM

Quote:

Originally Posted by shawnsheridan

No, that is your problem, You should not have changed the Werte Value for those. Aktiv is all that is needed, and now they are meesed up. You need to VO Code CAS to reset it, then go back and make sure these are aktiv, and leave Werte Values alone.

Interesting, I was going off of the cheat sheet which said to modify to 01. I'm not sure what VO Code is, any documentation on how to do that? I did backup the original maps so worst case I will revert the files.

shawnsheridan · 08-28-2016, 11:21 PM

Quote:

Originally Posted by suitepee

Interesting, I was going off of the cheat sheet which said to modify to 01. I'm not sure what VO Code is, any documentation on how to do that? I did backup the original maps so worst case I will revert the files.

First choice is always to only change the Drop-Down box of predefined values, and let it subsequently determine the corresponding Werte value automatically.

Only change Werte values directly if and when the Drop-Down box of predefined values does not have choice you need.

Just Right-Click on CAS Module (the ECU itself and not the underlying CAFD) and Select Code to reset it, then go back and make your FDL Changes using the Drop-Down box of predefined values.

Bmw doubles · 08-30-2016, 11:13 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Bmw doubles

Hey I tried the white cluster and didn't work for me. Is there another area I have to code?

Does not work on newer firmware.

It ended up working, eventually. On the second time I turned the car on. Don't know why that was. The only thing is you can't dim it and map day/night mode doesn't work. I ended up programming a button for day and night map modes.

Almaretto · 09-04-2016, 03:51 AM

Quote:

Originally Posted by Bmw doubles

It ended up working, eventually. On the second time I turned the car on. Don't know why that was. The only thing is you can't dim it and map day/night mode doesn't work. I ended up programming a button for day and night map modes.

Some coding (eg, close trunk via FOB) requires shutting down the car for 15-20 minutes. Other coding (eg, anything involving head unit) is effective immediately.

ALPWhite · 09-04-2016, 08:05 AM

Morning everyone! Been looking to start coding a few things on my own and would appreciate if anyone can provide info on where to get software from for my 2013 535iX.

Thanks and hope everyone is having a great Labor Day weekend!

shawnsheridan · 09-04-2016, 08:34 AM

Quote:

Originally Posted by ALPWhite

Morning everyone! Been looking to start coding a few things on my own and would appreciate if anyone can provide info on where to get software from for my 2013 535iX.

Thanks and hope everyone is having a great Labor Day weekend!

PM sent.

claykin · 09-04-2016, 11:16 AM

Quote:

Originally Posted by Almaretto

Does not work on newer firmware.

Curious, do you know if the M Performance logo on start (KOMBI) works in MY16 F10? Wasn't listed on any of the printed F10 cheat sheets, but I see it listed as a cheat option in esys launcher.

Almaretto · 09-04-2016, 02:06 PM

Quote:

Originally Posted by claykin

Curious, do you know if the M Performance logo on start (KOMBI) works in MY16 F10? Wasn't listed on any of the printed F10 cheat sheets, but I see it listed as a cheat option in esys launcher.

The different options will result in various images, but not desired M performance.

Stück · 09-04-2016, 02:16 PM

Quote:

Originally Posted by claykin

Curious, do you know if the M Performance logo on start (KOMBI) works in MY16 F10? Wasn't listed on any of the printed F10 cheat sheets, but I see it listed as a cheat option in esys launcher.

From what I've seen you wouldn't want it anyway, it says ///M550d on bootup.

AWF87M2 · 09-28-2016, 08:45 AM

I just bought a coding cable from ebay. Thinking about coding my cars, can someone point me to where I can obtain the right coding software for my 2011 535i? thank you!

shawnsheridan · 09-28-2016, 09:45 AM

Quote:

Originally Posted by AWF87M2

I just bought a coding cable from ebay. Thinking about coding my cars, can someone point me to where I can obtain the right coding software for my 2011 535i? thank you!

PM sent.

Carlos528i · 09-28-2016, 04:52 PM

Hello, Could I get a link to the most recent version of PSdZData files?

Thanks!

shawnsheridan · 09-28-2016, 05:14 PM

Quote:

Originally Posted by Carlos528i

Hello, Could I get a link to the most recent version of PSdZData files?

Thanks!

PM sent.

08-28-2016, 11:59 AM	#180
paul223 Major 411 Rep 1,126 Posts Drives: F10 Join Date: Dec 2013 Location: arkansas iTrader: (0)	I have a hard drive plug in USB port with 700 video songs, but it will only go up to 500th song. See pic. How do I remove this limitation? Attached Images
	Appreciate 0 Quote

08-28-2016, 05:33 PM	#181
Stück Major 801 Rep 1,214 Posts Drives: F15 X5, E46 330i, R56 Mini.S Join Date: May 2016 Location: Houston, TX iTrader: (4)	Browse the directory, it will then find everything on there after. I have 1500 FLAC files on my USB stick, it sees them all just fine.
	Appreciate 0 Quote

08-28-2016, 08:38 PM	#182
suitepee New Member 1 Rep 11 Posts Drives: 2013 528i Join Date: Jun 2016 Location: Smyrna, GA iTrader: (0)	Thanks for all the information guys -- Just did my first session and am hooked! Already was able to turn off landing disclaimer, show PSI on tires, disable driver seatbelt gong. However I used the cheat sheet to set the folding mirrors, and set the below: CAS / KOMFORTSCHLIESSUNG_FB = aktiv (01) CAS / KOMFORTSCHLIESSUNG_PA = aktiv (01) But that functionality does not work. I also tried to hold 2 seconds and still doesn't work. Anyone have any tips to get that piece working to fold in mirrors on lock / fold out on unlock? I do have the comfort access package. Thanks!
	Appreciate 0 Quote

09-04-2016, 08:05 AM	#190
ALPWhite First Lieutenant 138 Rep 345 Posts Drives: 2013 Alpine White 535iX MSport Join Date: Jul 2007 Location: NJ iTrader: (0)	Morning everyone! Been looking to start coding a few things on my own and would appreciate if anyone can provide info on where to get software from for my 2013 535iX. Thanks and hope everyone is having a great Labor Day weekend! __________________ Current: 2013 F10 Previous: 2007 E90 Previous: 1994 E34
	Appreciate 0 Quote

09-28-2016, 08:45 AM	#195
AWF87M2 Major 827 Rep 1,287 Posts Drives: BMW Join Date: Apr 2014 Location: USA iTrader: (8)	I just bought a coding cable from ebay. Thinking about coding my cars, can someone point me to where I can obtain the right coding software for my 2011 535i? thank you!
	Appreciate 0 Quote

09-28-2016, 04:52 PM	#197
Carlos528i Enlisted Member 7 Rep 35 Posts Drives: 2013 528i Join Date: Mar 2012 Location: Marietta, GA iTrader: (0) Garage List 2013 BMW 528i [0.00]	Hello, Could I get a link to the most recent version of PSdZData files? Thanks!
	Appreciate 0 Quote