[JasonE]

Hello,

I purchased my car in California which requires a front plate however, since I'm military I am registering it in Florida which doesn't require a front plate. My car has the bracket on it already but I'm trying to find the best way to cover the holes. Is it easier just to do the plugs, get the holes filled and repaint the bumper or buy a new front bumper? I want it to look seamless and clean, as it should. Any advice?? Thanks in advanced.

[Ickdeep]

https://www.bumperplugs.com/index.ph...&product_id=73

Bummer plugs are the easiest and cheaper way.

Getting holes filled or new bumper and paint might be around the same price.

[JasonE]

Originally Posted by Ickdeep

https://www.bumperplugs.com/index.ph...&product_id=73

Bummer plugs are the easiest and cheaper way.

Getting holes filled or new bumper and paint might be around the same price.

Originally Posted by Ickdeep

https://www.bumperplugs.com/index.ph...&product_id=73

Bummer plugs are the easiest and cheaper way.

Getting holes filled or new bumper and paint might be around the same price.

I'll give these a shot. Thanks for the help.

[EL Jeffe 5]

I got my bumper plugs in home depot less then $5 also I need it some touch up paint
stop by dealer got it done within day with paint overnight dry.
Good luck

[Kracker DC5]

I wish that was the case when I bought my car (came from NE region). Now I have 5 holes in my front bumper. 5 because the DA service people used too long of a screw to hold the plate on, and it went into the bumper as well.

Figured I would give this a shot before dropping $70 on some plastic plugs

http://www.mercedescla.org/forum/62-...ate-holes.html

[ezaircon4jc]

Originally Posted by Kracker DC5

I wish that was the case when I bought my car (came from NE region). Now I have 5 holes in my front bumper. 5 because the DA service people used too long of a screw to hold the plate on, and it went into the bumper as well.

Figured I would give this a shot before dropping $70 on some plastic plugs

http://www.mercedescla.org/forum/62-...ate-holes.html

Ohhhh.... My dealer drilled 4 holes Those plugs look like they will do the trick and be much less intrusive.

[JasonE]

Originally Posted by Kracker DC5

I wish that was the case when I bought my car (came from NE region). Now I have 5 holes in my front bumper. 5 because the DA service people used too long of a screw to hold the plate on, and it went into the bumper as well.

Figured I would give this a shot before dropping $70 on some plastic plugs

http://www.mercedescla.org/forum/62-...ate-holes.html

Siiick, thanks! I'll check to see if I can make that happen. Appreciate the help!