|
|
06-25-2011, 10:20 PM | #1 |
Second Lieutenant
50
Rep 287
Posts |
550i Boost
I wonder if there is a way to see the boost on our cars w/o an external gauge?
Maybe with the OBD2 using this tool? http://www.ot-2.com/overview.html
__________________
Current, i3 Capparis White, Lodge interior
Ex- F10 550i Xdrive M sport, white Ex- trade-in 2008 E90 M3 |
07-03-2011, 10:52 PM | #2 |
Second Lieutenant
50
Rep 287
Posts |
Well i bought the OT-2 from innovate motorsports and tried it this weekend.
Work good, got to datalog a few things. Did some test, and can read, RPM, speed, intake air temp, fuel pressure, MAP, and lost more. Good log data with 1/4 mile data But cant figure out the correct value for the MAP sensor output. As the output is in kpa and the reading is always in the positive, yet should be in vacuum on idle. and the peak value is 120kpa = 17.4psi. Seems way to high. Considering Dinan says on there website that stock boost is 9.8psi.
__________________
Current, i3 Capparis White, Lodge interior
Ex- F10 550i Xdrive M sport, white Ex- trade-in 2008 E90 M3 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|