[twelve535i]

If I get a wheel that 19 x 8.5 (offset 25mm) with 255/40/19 tires, will there be any issues on my stock 535i x drive, with no drop?
I think it will be very close to the fender, but I'm not sure.

[Dan1416]

You'll be fine. No worries at all

[bake]

Yep no clearance issue with those specs.

[twelve535i]

Originally Posted by Dan1416

You'll be fine. No worries at all

Originally Posted by bake

Yep no clearance issue with those specs.

Thanks Guys!

[fharose]

Folks,

I have an 2011 550i, installed MRR HR6 wheels 20x9.5 all four. Will there be an issue ?
I see the front is close to the fender, the tire shop guy said it's not rubbing any surface.

Will there be an impact to suspension, handling etc ?
The current tire size is 245/35/20.. Can I install 275/35/20 on the rear with this set ?

Thanks,
Ferry

[bake]

Originally Posted by fharose

Folks,

I have an 2011 550i, installed MRR HR6 wheels 20x9.5 all four. Will there be an issue ?
I see the front is close to the fender, the tire shop guy said it's not rubbing any surface.

Will there be an impact to suspension, handling etc ?
The current tire size is 245/35/20.. Can I install 275/35/20 on the rear with this set ?

Thanks,
Ferry

We would need to know the wheel offset to answer that question.

[twelve535i]

What if I run 19 x 9 44 offset square set up with 255/40 /19?

[Dan1416]

Originally Posted by twelve535i

What if I run 19 x 9 44 offset square set up with 255/40 /19?

It would work in the rear but you'd probably wanna run 15mm spacers minimum. Fronts would probably need them as well as that offset might hit the caliper.

[bake]

Think this offset might hit the strut tower on the front. Probably worth a test fit. They will be extremely dunk in to the fender as well. Not an ideal fitment at all.