Indianapolis coders?

Brandon6127C · 10-09-2016, 06:35 PM

Anyone in Indianapolis that can code my car? I've seen a lot of people are stopping the remote coding. Looking for alpina trans flash and some creature comforts.

Almaretto · 10-11-2016, 07:41 PM

What do you mean people are stopping the remote coding?
Remote coding is fine. I would not remotely flash.

Brandon6127C · 10-12-2016, 05:27 PM

I'm looking for things simple things like doors unlock when engine shuts off. No one is willing to do it remotely anymore. For example Alex@alpinemss won't code remote anymore according to a recent post

Rick-F · 10-27-2016, 10:05 AM

Quote:

Originally Posted by Brandon6127C

I'm looking for things simple things like doors unlock when engine shuts off. No one is willing to do it remotely anymore. For example Alex@alpinemss won't code remote anymore according to a recent post

That's odd-- Alex coded my 535ix about 10 days ago. Did you CALL him and ask HIM?

NV GUNS · 10-27-2016, 04:45 PM

why not just buy a cable and watch the step by step instructions on professor YouTube. it is not difficult at all also if you take your car in to the dealer might reprogram it and then you have nothing. I can provide you phone support if you want, I have help another member on here after is Icarly deleted some very important files.

AmooManiak · 10-28-2016, 05:00 PM

I vouch for NV GUNS. I was the member who he had to re-code.

BoskiMistrz · 10-31-2016, 01:27 PM

My Vote for code_my_bimmer - just remove _ ( check for website and facebook ) , great remote help with coding

doublemetreF10 · 02-02-2017, 05:27 AM

I'm new to BMW, but I am very familiar with coding VW cars with VAG-COM. What is the preferred system/software for coding BMW?

Almaretto · 02-02-2017, 12:29 PM

Quote:

Originally Posted by doublemetreF10

I'm new to BMW, but I am very familiar with coding VW cars with VAG-COM. What is the preferred system/software for coding BMW?

E-Series:

Interface = K+DCAN Cable or ICOM
ECU Data Files = SP-Daten
NCS Expert = Coding Software
WinKFP = Programming (Flashing) Software
EDIABAS = Low Level ECU Communication Software used by NCS Expert & WinKFP

Fxx/Ixx/Gxx-Series:

Interface = ENET Cable or ICOM
ECU Data Files = PSdZData
E-Sys = Coding Software
E-Sys = Programming (Flashing) Software

ICOM

ICOM A: main interface
ICOM B: adapter for programming multimedia in E series
ICOM C: adapter for old BMW with round 20 pin diagnostic plug
ICOM D: adapter for motorcycles

Additional Dealership Level Software

ISTA+ (AKA Rheingold or ISTA-D)
- DIAGNOSTICS for All Vehicles
- PROGRAMMING for F/I/G/RR & MINI, but requires ICOM
ISTA-P
- PROGRAMMING traditionally for all chassis, but is being phased out by August 2017, except for legacy E-series.
- ICOM Recommended. An ICOM emulator with K+DCAN or ENET can be used, but will NOT not communicate over all protocols to program every ECU.
Replacement ECU's must be NEW

Additional Details: Beginner's Guide to BMW ISTA+

Sunny 528i · 02-02-2017, 02:36 PM

Quote:

Originally Posted by Brandon6127C

I'm looking for things simple things like doors unlock when engine shuts off. No one is willing to do it remotely anymore. For example Alex@alpinemss won't code remote anymore according to a recent post

If you already have the ENET cable and E-Sys installed i can code remotely for you.

10-09-2016, 06:35 PM	#1
Brandon6127C Private 11 Rep 80 Posts Drives: 2011 BMW 535i M sport Join Date: Sep 2016 Location: Indiana iTrader: (1)	Indianapolis coders? Anyone in Indianapolis that can code my car? I've seen a lot of people are stopping the remote coding. Looking for alpina trans flash and some creature comforts.
	Appreciate 0 Tweet Quote

10-11-2016, 07:41 PM	#2
Almaretto Major General 2374 Rep 8,364 Posts Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View, CA iTrader: (0)	What do you mean people are stopping the remote coding? Remote coding is fine. I would not remotely flash.
	Appreciate 0 Quote

10-12-2016, 05:27 PM	#3
Brandon6127C Private 11 Rep 80 Posts Drives: 2011 BMW 535i M sport Join Date: Sep 2016 Location: Indiana iTrader: (1)	Fa I'm looking for things simple things like doors unlock when engine shuts off. No one is willing to do it remotely anymore. For example Alex@alpinemss won't code remote anymore according to a recent post
	Appreciate 0 Quote

10-27-2016, 04:45 PM	#5
NV GUNS First Lieutenant 58 Rep 357 Posts Drives: 19' M2C Join Date: Jun 2016 Location: chicago iTrader: (1) Garage List 2023 M550 [6.75] 2019 M2 Competition [0.00] 2002 330ci [0.00]	why not just buy a cable and watch the step by step instructions on professor YouTube. it is not difficult at all also if you take your car in to the dealer might reprogram it and then you have nothing. I can provide you phone support if you want, I have help another member on here after is Icarly deleted some very important files.
	Appreciate 0 Quote

10-28-2016, 05:00 PM	#6
AmooManiak Lieutenant Colonel 632 Rep 1,585 Posts Drives: 21 X5 M50i -> M2C -> 21 M5C Join Date: Aug 2016 Location: Illinois iTrader: (0)	I vouch for NV GUNS. I was the member who he had to re-code.
	Appreciate 1 NV GUNS57.50 Quote

10-31-2016, 01:27 PM	#7
BoskiMistrz BMW Coder 2 Rep 5 Posts Drives: 2011 F10 535i Join Date: May 2016 Location: EU iTrader: (0)	My Vote for code_my_bimmer - just remove _ ( check for website and facebook ) , great remote help with coding __________________ 2011 F10 535i Custom Tuned, rear muffler delete, aftermarket Chargepipe and Turbopipe
	Appreciate 0 Quote

02-02-2017, 05:27 AM	#8
doublemetreF10 Enlisted Member 2 Rep 39 Posts Drives: '13 F10 535xi N55 Join Date: Dec 2016 Location: Indianapolis, IN USA iTrader: (0)	I'm new to BMW, but I am very familiar with coding VW cars with VAG-COM. What is the preferred system/software for coding BMW? __________________ TO SEE THE WORLD, THINGS DANGEROUS TO COME TO, TO SEE BEHIND WALLS, TO DRAW CLOSER, TO FIND EACH OTHER AND TO FEEL. THAT IS THE PURPOSE OF LIFE.
	Appreciate 0 Quote