Looking for In depth

335iNavyGuy · 02-06-2021, 11:19 AM

Ok, so im finally getting back to my project "550i flood victim"..

Been quite busy the last couple months.

Whats been done so far,

Replaced / coded :
Both DME's
CaS module
Integrated PCM
Fuel Pump Control Module
Central Gateway module
ICM Airbag module
Starter
Both fuse panels

The vehicle was running, Not driving, but i got it to start and run. It was rough but still.

Now after awhile, it slowly stopped starting. And now it just cranks.

Hoping someone else can lend me some time over TeamViewer / chat or whatever to help me figure out the next step.

Again, willing to pay for the help, i do not expect it for free.

TZ · 02-06-2021, 06:48 PM

You may want to try other site as well. https://www.bimmerfest.com/forums/
There are decent guys there too.

M_Bimmer · 02-06-2021, 07:31 PM

What does ISTA+ return?

335iNavyGuy · 02-06-2021, 08:15 PM

Quote:

Originally Posted by M_Bimmer

What does ISTA+ return?

Way too much to post.

M_Bimmer · 02-07-2021, 10:21 AM

Screen shots will do just fine...

Nickco43 · 02-07-2021, 10:37 AM

Quote:

Originally Posted by 335iNavyGuy

Ok, so im finally getting back to my project "550i flood victim"..

Been quite busy the last couple months.

Whats been done so far,

Replaced / coded :
Both DME's
CaS module
Integrated PCM
Fuel Pump Control Module
Central Gateway module
ICM Airbag module
Starter
Both fuse panels

The vehicle was running, Not driving, but i got it to start and run. It was rough but still.

Now after awhile, it slowly stopped starting. And now it just cranks.

Hoping someone else can lend me some time over TeamViewer / chat or whatever to help me figure out the next step.

Again, willing to pay for the help, i do not expect it for free.

Check power at each connector.

02-06-2021, 11:19 AM	#1
335iNavyGuy Colonel 205 Rep 2,349 Posts Drives: 07 N54 E92 Join Date: May 2013 Location: San Diego CA iTrader: (3)	Looking for In depth - ISTA Help. Will pay for help Ok, so im finally getting back to my project "550i flood victim".. Been quite busy the last couple months. Whats been done so far, Replaced / coded : Both DME's CaS module Integrated PCM Fuel Pump Control Module Central Gateway module ICM Airbag module Starter Both fuse panels The vehicle was running, Not driving, but i got it to start and run. It was rough but still. Now after awhile, it slowly stopped starting. And now it just cranks. Hoping someone else can lend me some time over TeamViewer / chat or whatever to help me figure out the next step. Again, willing to pay for the help, i do not expect it for free. __________________ 07 E92 Jb4-G5 - Sport Exhaust - Titek BOV BBS Lm reps - AFE dual cone intake
	Appreciate 1 OnlyGerman363.50 Tweet Quote

02-06-2021, 06:48 PM	#2
TZ Second Lieutenant 51 Rep 229 Posts Drives: 2011 535i xDrive, 2014 435i CO Join Date: Mar 2015 Location: NJ iTrader: (0)	You may want to try other site as well. https://www.bimmerfest.com/forums/ There are decent guys there too. __________________ 2011 535i xDrive Black/Black, Michelin PS AS 4 2014 435i RWD Convertible Service Manual: www.newtis.info Part: http://www.realoem.com
	Appreciate 0 Quote

02-06-2021, 07:31 PM	#3
M_Bimmer Captain 583 Rep 831 Posts Drives: G12 B7, G07 XB7, F02 B7, 991.1 Join Date: May 2020 Location: Left Coast iTrader: (0)	What does ISTA+ return?
	Appreciate 0 Quote

02-07-2021, 10:21 AM	#5
M_Bimmer Captain 583 Rep 831 Posts Drives: G12 B7, G07 XB7, F02 B7, 991.1 Join Date: May 2020 Location: Left Coast iTrader: (0)	Screen shots will do just fine...
	Appreciate 0 Quote