What about pedestrian Sensor with M-Tech bumper

HaugF30 · 09-14-2023, 10:50 AM

Recently installed a M-Tech bumper (Not OEM) and there is no holder for the Pedestrian sensor sitting in the front on the orgiginal Pre-facelift bumper.

Anyone did this conversion and know what to do?

https://f10.5post.com/forums/attachm...1&d=1694706609

B-Buster · 09-14-2023, 05:00 PM

Took a piece of plastic and glued sensor on it and glued said piece of plastic onto the bumper as the mounting part for the MSport bumper was not available as a single part.

Bounceme · 09-15-2023, 01:59 AM

I also just made a diy fix, so i could mount it.
There are no guides, that i could find, so i just fixed it.

HaugF30 · 09-18-2023, 06:41 AM

Cut the original holder out of the Pre-Facelift Bumper and installed it between the grills in the front, just above the Foam bar

09-14-2023, 10:50 AM	#1
HaugF30 Private 0 Rep 59 Posts Drives: Bmw F30 Join Date: Jul 2018 Location: Norway iTrader: (0)	What about pedestrian Sensor with M-Tech bumper Recently installed a M-Tech bumper (Not OEM) and there is no holder for the Pedestrian sensor sitting in the front on the orgiginal Pre-facelift bumper. Anyone did this conversion and know what to do? https://f10.5post.com/forums/attachm...1&d=1694706609 Attached Images
	Appreciate 0 Tweet Quote

09-14-2023, 05:00 PM	#2
B-Buster Enlisted Member 24 Rep 38 Posts Drives: F10 535i, E63 650i Join Date: May 2020 Location: The Netherlands iTrader: (0)	Took a piece of plastic and glued sensor on it and glued said piece of plastic onto the bumper as the mounting part for the MSport bumper was not available as a single part.
	Appreciate 0 Quote

09-15-2023, 01:59 AM	#3
Bounceme Private First Class 111 Rep 138 Posts Drives: 2016 F11 520d LCI Join Date: Oct 2015 Location: Nordjylland iTrader: (0)	I also just made a diy fix, so i could mount it. There are no guides, that i could find, so i just fixed it.
	Appreciate 0 Quote

09-18-2023, 06:41 AM	#4
HaugF30 Private 0 Rep 59 Posts Drives: Bmw F30 Join Date: Jul 2018 Location: Norway iTrader: (0)	Cut the original holder out of the Pre-Facelift Bumper and installed it between the grills in the front, just above the Foam bar
	Appreciate 0 Quote